add nanopi4 configuration with docker flags enabled#1
Merged
friendlyarm merged 3 commits intofriendlyarm:nanopi4-linux-v4.4.yfrom Nov 6, 2018
Merged
Conversation
Several kernel configs necessary to run docker-ce were disabled. This attempts to fixs this. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Turns out kubernetes/docker expect these things to be modules. Go ahead and change what we can to be modules. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Author
|
Updated most of the new inclusions to modules. |
Required by kubernetes Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
This patch fixes the following warning:
[ 2.226264] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
[ 2.226341] in_atomic(): 0, irqs_disabled(): 0, pid: 1, name: swapper/0
[ 2.226366] 4 locks held by swapper/0/1:
[ 2.226385] #0: (&dev->mutex){......}, at: [<ffffff800851c664>] __device_attach+0x3c/0x134
[ 2.226515] #1: (cpu_hotplug.lock){......}, at: [<ffffff800809feb0>] get_online_cpus+0x38/0x9c
[ 2.226594] #2: (subsys mutex#7){......}, at: [<ffffff800851b0e4>] subsys_interface_register+0x54/0xfc
[ 2.226684] #3: (rcu_read_lock){......}, at: [<ffffff800845c764>] rockchip_adjust_power_scale+0x88/0x450
[ 2.226771] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.4.132 #600
[ 2.226790] Hardware name: Rockchip PX30 evb ddr3 board (DT)
[ 2.226809] Call trace:
[ 2.226840] [<ffffff800808a0d4>] dump_backtrace+0x0/0x1ec
[ 2.226889] [<ffffff800808a2d4>] show_stack+0x14/0x1c
[ 2.226918] [<ffffff80083c41b4>] dump_stack+0x94/0xbc
[ 2.226946] [<ffffff80080cb708>] ___might_sleep+0x108/0x118
[ 2.226972] [<ffffff80080cb788>] __might_sleep+0x70/0x80
[ 2.227001] [<ffffff8008b6d1d0>] mutex_lock_nested+0x54/0x38c
[ 2.227031] [<ffffff8008858714>] __of_clk_get_from_provider+0x44/0xec
[ 2.227061] [<ffffff8008852814>] __of_clk_get_by_name+0xd4/0x14c
[ 2.227112] [<ffffff80088528a4>] of_clk_get_by_name+0x18/0x28
[ 2.227140] [<ffffff800845c980>] rockchip_adjust_power_scale+0x2a4/0x450
[ 2.227171] [<ffffff800877f630>] cpufreq_init+0x154/0x394
[ 2.227199] [<ffffff8008776ac4>] cpufreq_online+0x1b0/0x68c
[ 2.227225] [<ffffff8008777040>] cpufreq_add_dev+0x3c/0x94
[ 2.227253] [<ffffff800851b168>] subsys_interface_register+0xd8/0xfc
[ 2.227281] [<ffffff80087772d8>] cpufreq_register_driver+0x10c/0x1a8
[ 2.227332] [<ffffff800877f93c>] dt_cpufreq_probe+0xcc/0xe8
[ 2.227360] [<ffffff800851e7b8>] platform_drv_probe+0x54/0xa8
[ 2.227385] [<ffffff800851c924>] driver_probe_device+0x194/0x278
[ 2.227411] [<ffffff800851cb40>] __device_attach_driver+0x60/0x9c
[ 2.227439] [<ffffff800851ae14>] bus_for_each_drv+0x9c/0xbc
[ 2.227464] [<ffffff800851c6f0>] __device_attach+0xc8/0x134
[ 2.227488] [<ffffff800851ccb8>] device_initial_probe+0x10/0x18
[ 2.227514] [<ffffff800851bcec>] bus_probe_device+0x2c/0x90
[ 2.227541] [<ffffff8008519e90>] device_add+0x44c/0x510
[ 2.227570] [<ffffff800851e4d4>] platform_device_add+0xa0/0x1e4
[ 2.227597] [<ffffff800851ef28>] platform_device_register_full+0xa4/0xe4
[ 2.227627] [<ffffff80090f8680>] rockchip_cpufreq_driver_init+0xd4/0x31c
[ 2.227654] [<ffffff8008083468>] do_one_initcall+0x84/0x1a4
[ 2.227682] [<ffffff80090c0e98>] kernel_init_freeable+0x260/0x264
[ 2.227708] [<ffffff8008b6ab68>] kernel_init+0x10/0xf8
[ 2.227734] [<ffffff80080832a0>] ret_from_fork+0x10/0x30
Fixes: 197a2d3 ("soc: rockchip: opp_select: add missing rcu lock")
Change-Id: Ib52b6f7bc77bb207a1c8c6880f7a5e916fa3d2ee
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ 1.644632] rockchip-spi ff190000.spi: no high_speed pinctrl state [ 1.646337] Unable to handle kernel NULL pointer dereference at virtual address 00000005 [ 1.647412] pgd = ffffff80093b9000 [ 1.647873] [00000005] *pgd=00000000feffe003, *pud=00000000feffe003, *pmd=0000000000000000 [ 1.649019] Internal error: Oops: 96000005 [#1] SMP [ 1.649643] Modules linked in: [ 1.650065] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.120-rockchip-ayufan-195 #1 [ 1.651042] Hardware name: Pine64 Rock64 (DT) [ 1.651603] task: ffffffc0f5d48000 task.stack: ffffffc0f5d44000 [ 1.652366] PC is at pinctrl_select_state+0x3c/0x12c [ 1.653004] LR is at pinctrl_select_state+0x7c/0x12c [ 1.653641] pc : [<ffffff8008596840>] lr : [<ffffff8008596880>] pstate: 60000045 [ 1.654574] sp : ffffffc0f5d47420 patch from:rockchip-linux@c9dc2ab Change-Id: Ie2926a505288d7198a4d49c2abf5a4207281c89d Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit a8d7aa1 ] syzbot reported a crash in tasklet_action_common() caused by dccp. dccp needs to make sure socket wont disappear before tasklet handler has completed. This patch takes a reference on the socket when arming the tasklet, and moves the sock_put() from dccp_write_xmit_timer() to dccp_write_xmitlet() kernel BUG at kernel/softirq.c:514! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 17 Comm: ksoftirqd/1 Not tainted 4.17.0-rc3+ rockchip-linux#30 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tasklet_action_common.isra.19+0x6db/0x700 kernel/softirq.c:515 RSP: 0018:ffff8801d9b3faf8 EFLAGS: 00010246 dccp_close: ABORT with 65423 bytes unread RAX: 1ffff1003b367f6b RBX: ffff8801daf1f3f0 RCX: 0000000000000000 RDX: ffff8801cf895498 RSI: 0000000000000004 RDI: 0000000000000000 RBP: ffff8801d9b3fc40 R08: ffffed0039f12a95 R09: ffffed0039f12a94 dccp_close: ABORT with 65423 bytes unread R10: ffffed0039f12a94 R11: ffff8801cf8954a3 R12: 0000000000000000 R13: ffff8801d9b3fc18 R14: dffffc0000000000 R15: ffff8801cf895490 FS: 0000000000000000(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2bc28000 CR3: 00000001a08a9000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tasklet_action+0x1d/0x20 kernel/softirq.c:533 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285 dccp_close: ABORT with 65423 bytes unread run_ksoftirqd+0x86/0x100 kernel/softirq.c:646 smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164 kthread+0x345/0x410 kernel/kthread.c:238 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412 Code: 48 8b 85 e8 fe ff ff 48 8b 95 f0 fe ff ff e9 94 fb ff ff 48 89 95 f0 fe ff ff e8 81 53 6e 00 48 8b 95 f0 fe ff ff e9 62 fb ff ff <0f> 0b 48 89 cf 48 89 8d e8 fe ff ff e8 64 53 6e 00 48 8b 8d e8 RIP: tasklet_action_common.isra.19+0x6db/0x700 kernel/softirq.c:515 RSP: ffff8801d9b3faf8 Fixes: dc841e3 ("dccp: Extend CCID packet dequeueing interface") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: dccp@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit 2c5d5b1 ] syzbot loves to set very small mtu on devices, since it brings joy. We must make llc_ui_sendmsg() fool proof. usercopy: Kernel memory overwrite attempt detected to wrapped address (offset 0, size 18446612139802320068)! kernel BUG at mm/usercopy.c:100! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 17464 Comm: syz-executor1 Not tainted 4.17.0-rc3+ rockchip-linux#36 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:usercopy_abort+0xbb/0xbd mm/usercopy.c:88 RSP: 0018:ffff8801868bf800 EFLAGS: 00010282 RAX: 000000000000006c RBX: ffffffff87d2fb00 RCX: 0000000000000000 RDX: 000000000000006c RSI: ffffffff81610731 RDI: ffffed0030d17ef6 RBP: ffff8801868bf858 R08: ffff88018daa4200 R09: ffffed003b5c4fb0 R10: ffffed003b5c4fb0 R11: ffff8801dae27d87 R12: ffffffff87d2f8e0 R13: ffffffff87d2f7a0 R14: ffffffff87d2f7a0 R15: ffffffff87d2f7a0 FS: 00007f56a14ac700(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2bc21000 CR3: 00000001abeb1000 CR4: 00000000001426f0 DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000030602 Call Trace: check_bogus_address mm/usercopy.c:153 [inline] __check_object_size+0x5d9/0x5d9 mm/usercopy.c:256 check_object_size include/linux/thread_info.h:108 [inline] check_copy_size include/linux/thread_info.h:139 [inline] copy_from_iter_full include/linux/uio.h:121 [inline] memcpy_from_msg include/linux/skbuff.h:3305 [inline] llc_ui_sendmsg+0x4b1/0x1530 net/llc/af_llc.c:941 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:639 __sys_sendto+0x3d7/0x670 net/socket.c:1789 __do_sys_sendto net/socket.c:1801 [inline] __se_sys_sendto net/socket.c:1797 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x455979 RSP: 002b:00007f56a14abc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f56a14ac6d4 RCX: 0000000000455979 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000018 RBP: 000000000072bea0 R08: 00000000200012c0 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000548 R14: 00000000006fbf60 R15: 0000000000000000 Code: 55 c0 e8 c0 55 bb ff ff 75 c8 48 8b 55 c0 4d 89 f9 ff 75 d0 4d 89 e8 48 89 d9 4c 89 e6 41 56 48 c7 c7 80 fa d2 87 e8 a0 0b a3 ff <0f> 0b e8 95 55 bb ff e8 c0 a8 f7 ff 8b 95 14 ff ff ff 4d 89 e8 RIP: usercopy_abort+0xbb/0xbd mm/usercopy.c:88 RSP: ffff8801868bf800 Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
…s found [ Upstream commit 72f17ba ] If an OVS_ATTR_NESTED attribute type is found while walking through netlink attributes, we call nlattr_set() recursively passing the length table for the following nested attributes, if different from the current one. However, once we're done with those sub-nested attributes, we should continue walking through attributes using the current table, instead of using the one related to the sub-nested attributes. For example, given this sequence: 1 OVS_KEY_ATTR_PRIORITY 2 OVS_KEY_ATTR_TUNNEL 3 OVS_TUNNEL_KEY_ATTR_ID 4 OVS_TUNNEL_KEY_ATTR_IPV4_SRC 5 OVS_TUNNEL_KEY_ATTR_IPV4_DST 6 OVS_TUNNEL_KEY_ATTR_TTL 7 OVS_TUNNEL_KEY_ATTR_TP_SRC 8 OVS_TUNNEL_KEY_ATTR_TP_DST 9 OVS_KEY_ATTR_IN_PORT 10 OVS_KEY_ATTR_SKB_MARK 11 OVS_KEY_ATTR_MPLS we switch to the 'ovs_tunnel_key_lens' table on attribute #3, and we don't switch back to 'ovs_key_lens' while setting attributes #9 to #11 in the sequence. As OVS_KEY_ATTR_MPLS evaluates to 21, and the array size of 'ovs_tunnel_key_lens' is 15, we also get this kind of KASan splat while accessing the wrong table: [ 7654.586496] ================================================================== [ 7654.594573] BUG: KASAN: global-out-of-bounds in nlattr_set+0x164/0xde9 [openvswitch] [ 7654.603214] Read of size 4 at addr ffffffffc169ecf0 by task handler29/87430 [ 7654.610983] [ 7654.612644] CPU: 21 PID: 87430 Comm: handler29 Kdump: loaded Not tainted 3.10.0-866.el7.test.x86_64 #1 [ 7654.623030] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016 [ 7654.631379] Call Trace: [ 7654.634108] [<ffffffffb65a7c50>] dump_stack+0x19/0x1b [ 7654.639843] [<ffffffffb53ff373>] print_address_description+0x33/0x290 [ 7654.647129] [<ffffffffc169b37b>] ? nlattr_set+0x164/0xde9 [openvswitch] [ 7654.654607] [<ffffffffb53ff812>] kasan_report.part.3+0x242/0x330 [ 7654.661406] [<ffffffffb53ff9b4>] __asan_report_load4_noabort+0x34/0x40 [ 7654.668789] [<ffffffffc169b37b>] nlattr_set+0x164/0xde9 [openvswitch] [ 7654.676076] [<ffffffffc167ef68>] ovs_nla_get_match+0x10c8/0x1900 [openvswitch] [ 7654.684234] [<ffffffffb61e9cc8>] ? genl_rcv+0x28/0x40 [ 7654.689968] [<ffffffffb61e7733>] ? netlink_unicast+0x3f3/0x590 [ 7654.696574] [<ffffffffc167dea0>] ? ovs_nla_put_tunnel_info+0xb0/0xb0 [openvswitch] [ 7654.705122] [<ffffffffb4f41b50>] ? unwind_get_return_address+0xb0/0xb0 [ 7654.712503] [<ffffffffb65d9355>] ? system_call_fastpath+0x1c/0x21 [ 7654.719401] [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370 [ 7654.726298] [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370 [ 7654.733195] [<ffffffffb53fe4b5>] ? kasan_unpoison_shadow+0x35/0x50 [ 7654.740187] [<ffffffffb53fe62a>] ? kasan_kmalloc+0xaa/0xe0 [ 7654.746406] [<ffffffffb53fec32>] ? kasan_slab_alloc+0x12/0x20 [ 7654.752914] [<ffffffffb53fe711>] ? memset+0x31/0x40 [ 7654.758456] [<ffffffffc165bf92>] ovs_flow_cmd_new+0x2b2/0xf00 [openvswitch] [snip] [ 7655.132484] The buggy address belongs to the variable: [ 7655.138226] ovs_tunnel_key_lens+0xf0/0xffffffffffffd400 [openvswitch] [ 7655.145507] [ 7655.147166] Memory state around the buggy address: [ 7655.152514] ffffffffc169eb80: 00 00 00 00 00 00 00 00 00 00 fa fa fa fa fa fa [ 7655.160585] ffffffffc169ec00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7655.168644] >ffffffffc169ec80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa fa [ 7655.176701] ^ [ 7655.184372] ffffffffc169ed00: fa fa fa fa 00 00 00 00 fa fa fa fa 00 00 00 05 [ 7655.192431] ffffffffc169ed80: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00 [ 7655.200490] ================================================================== Reported-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: 982b527 ("openvswitch: Fix mask generation for nested attributes.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
commit 48fb6f4 upstream. Commit 65d8fc7 ("futex: Remove requirement for lock_page() in get_futex_key()") removed an unnecessary lock_page() with the side-effect that page->mapping needed to be treated very carefully. Two defensive warnings were added in case any assumption was missed and the first warning assumed a correct application would not alter a mapping backing a futex key. Since merging, it has not triggered for any unexpected case but Mark Rutland reported the following bug triggering due to the first warning. kernel BUG at kernel/futex.c:679! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 3695 Comm: syz-executor1 Not tainted 4.13.0-rc3-00020-g307fec773ba3 #3 Hardware name: linux,dummy-virt (DT) task: ffff80001e271780 task.stack: ffff000010908000 PC is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679 LR is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679 pc : [<ffff00000821ac14>] lr : [<ffff00000821ac14>] pstate: 8000014 The fact that it's a bug instead of a warning was due to an unrelated arm64 problem, but the warning itself triggered because the underlying mapping changed. This is an application issue but from a kernel perspective it's a recoverable situation and the warning is unnecessary so this patch removes the warning. The warning may potentially be triggered with the following test program from Mark although it may be necessary to adjust NR_FUTEX_THREADS to be a value smaller than the number of CPUs in the system. #include <linux/futex.h> #include <pthread.h> #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #include <sys/syscall.h> #include <sys/time.h> #include <unistd.h> #define NR_FUTEX_THREADS 16 pthread_t threads[NR_FUTEX_THREADS]; void *mem; #define MEM_PROT (PROT_READ | PROT_WRITE) #define MEM_SIZE 65536 static int futex_wrapper(int *uaddr, int op, int val, const struct timespec *timeout, int *uaddr2, int val3) { syscall(SYS_futex, uaddr, op, val, timeout, uaddr2, val3); } void *poll_futex(void *unused) { for (;;) { futex_wrapper(mem, FUTEX_CMP_REQUEUE_PI, 1, NULL, mem + 4, 1); } } int main(int argc, char *argv[]) { int i; mem = mmap(NULL, MEM_SIZE, MEM_PROT, MAP_SHARED | MAP_ANONYMOUS, -1, 0); printf("Mapping @ %p\n", mem); printf("Creating futex threads...\n"); for (i = 0; i < NR_FUTEX_THREADS; i++) pthread_create(&threads[i], NULL, poll_futex, NULL); printf("Flipping mapping...\n"); for (;;) { mmap(mem, MEM_SIZE, MEM_PROT, MAP_FIXED | MAP_SHARED | MAP_ANONYMOUS, -1, 0); } return 0; } Reported-and-tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org # 4.7+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
commit 69af7e2 upstream. Since get_kprobe_ctlblk() uses smp_processor_id() to access per-cpu variable, it hits smp_processor_id sanity check as below. [ 7.006928] BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 [ 7.007859] caller is debug_smp_processor_id+0x20/0x24 [ 7.008438] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1-00192-g4eb17253e4b5 #1 [ 7.008890] Hardware name: Generic DT based system [ 7.009917] [<c0313f0c>] (unwind_backtrace) from [<c030e6d8>] (show_stack+0x20/0x24) [ 7.010473] [<c030e6d8>] (show_stack) from [<c0c64694>] (dump_stack+0x84/0x98) [ 7.010990] [<c0c64694>] (dump_stack) from [<c071ca5c>] (check_preemption_disabled+0x138/0x13c) [ 7.011592] [<c071ca5c>] (check_preemption_disabled) from [<c071ca80>] (debug_smp_processor_id+0x20/0x24) [ 7.012214] [<c071ca80>] (debug_smp_processor_id) from [<c03335e0>] (optimized_callback+0x2c/0xe4) [ 7.013077] [<c03335e0>] (optimized_callback) from [<bf0021b0>] (0xbf0021b0) To fix this issue, call get_kprobe_ctlblk() right after irq-disabled since that disables preemption. Fixes: 0dc016d ("ARM: kprobes: enable OPTPROBES for ARM 32") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit 7f582b2 ] syzkaller found a reliable way to crash the host, hitting a BUG() in __tcp_retransmit_skb() Malicous MSG_FASTOPEN is the root cause. We need to purge write queue in tcp_connect_init() at the point we init snd_una/write_seq. This patch also replaces the BUG() by a less intrusive WARN_ON_ONCE() kernel BUG at net/ipv4/tcp_output.c:2837! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 5276 Comm: syz-executor0 Not tainted 4.17.0-rc3+ rockchip-linux#51 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__tcp_retransmit_skb+0x2992/0x2eb0 net/ipv4/tcp_output.c:2837 RSP: 0000:ffff8801dae06ff8 EFLAGS: 00010206 RAX: ffff8801b9fe61c0 RBX: 00000000ffc18a16 RCX: ffffffff864e1a49 RDX: 0000000000000100 RSI: ffffffff864e2e12 RDI: 0000000000000005 RBP: ffff8801dae073a0 R08: ffff8801b9fe61c0 R09: ffffed0039c40dd2 R10: ffffed0039c40dd2 R11: ffff8801ce206e93 R12: 00000000421eeaad R13: ffff8801ce206d4e R14: ffff8801ce206cc0 R15: ffff8801cd4f4a80 FS: 0000000000000000(0000) GS:ffff8801dae00000(0063) knlGS:00000000096bc900 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 0000000020000000 CR3: 00000001c47b6000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> tcp_retransmit_skb+0x2e/0x250 net/ipv4/tcp_output.c:2923 tcp_retransmit_timer+0xc50/0x3060 net/ipv4/tcp_timer.c:488 tcp_write_timer_handler+0x339/0x960 net/ipv4/tcp_timer.c:573 tcp_write_timer+0x111/0x1d0 net/ipv4/tcp_timer.c:593 call_timer_fn+0x230/0x940 kernel/time/timer.c:1326 expire_timers kernel/time/timer.c:1363 [inline] __run_timers+0x79e/0xc50 kernel/time/timer.c:1666 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1d1/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:525 [inline] smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863 Fixes: cf60af0 ("net-tcp: Fast Open client - sendmsg(MSG_FASTOPEN)") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit fba9eb7 ] Add a header with macros usable in assembler files to emit alternative code sequences. It works analog to the alternatives for inline assmeblies in C files, with the same restrictions and capabilities. The syntax is ALTERNATIVE "<default instructions sequence>", \ "<alternative instructions sequence>", \ "<features-bit>" and ALTERNATIVE_2 "<default instructions sequence>", \ "<alternative instructions sqeuence #1>", \ "<feature-bit #1>", "<alternative instructions sqeuence #2>", \ "<feature-bit #2>" Reviewed-by: Vasily Gorbik <gor@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit 5bdd0c6 ] If jffs2_iget() fails for a newly-allocated inode, jffs2_do_clear_inode() can get called twice in the error handling path, the first call in jffs2_iget() itself and the second through iget_failed(). This can result to a use-after-free error in the second jffs2_do_clear_inode() call, such as shown by the oops below wherein the second jffs2_do_clear_inode() call was trying to free node fragments that were already freed in the first jffs2_do_clear_inode() call. [ 78.178860] jffs2: error: (1904) jffs2_do_read_inode_internal: CRC failed for read_inode of inode 24 at physical location 0x1fc00c [ 78.178914] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b7b [ 78.185871] pgd = ffffffc03a567000 [ 78.188794] [6b6b6b6b6b6b6b7b] *pgd=0000000000000000, *pud=0000000000000000 [ 78.194968] Internal error: Oops: 96000004 [#1] PREEMPT SMP ... [ 78.513147] PC is at rb_first_postorder+0xc/0x28 [ 78.516503] LR is at jffs2_kill_fragtree+0x28/0x90 [jffs2] [ 78.520672] pc : [<ffffff8008323d28>] lr : [<ffffff8000eb1cc8>] pstate: 60000105 [ 78.526757] sp : ffffff800cea38f0 [ 78.528753] x29: ffffff800cea38f0 x28: ffffffc01f3f8e80 [ 78.532754] x27: 0000000000000000 x26: ffffff800cea3c70 [ 78.536756] x25: 00000000dc67c8ae x24: ffffffc033d6945d [ 78.540759] x23: ffffffc036811740 x22: ffffff800891a5b8 [ 78.544760] x21: 0000000000000000 x20: 0000000000000000 [ 78.548762] x19: ffffffc037d48910 x18: ffffff800891a588 [ 78.552764] x17: 0000000000000800 x16: 0000000000000c00 [ 78.556766] x15: 0000000000000010 x14: 6f2065646f6e695f [ 78.560767] x13: 6461657220726f66 x12: 2064656c69616620 [ 78.564769] x11: 435243203a6c616e x10: 7265746e695f6564 [ 78.568771] x9 : 6f6e695f64616572 x8 : ffffffc037974038 [ 78.572774] x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008 [ 78.576775] x5 : 002f91d85bd44a2f x4 : 0000000000000000 [ 78.580777] x3 : 0000000000000000 x2 : 000000403755e000 [ 78.584779] x1 : 6b6b6b6b6b6b6b6b x0 : 6b6b6b6b6b6b6b6b ... [ 79.038551] [<ffffff8008323d28>] rb_first_postorder+0xc/0x28 [ 79.042962] [<ffffff8000eb5578>] jffs2_do_clear_inode+0x88/0x100 [jffs2] [ 79.048395] [<ffffff8000eb9ddc>] jffs2_evict_inode+0x3c/0x48 [jffs2] [ 79.053443] [<ffffff8008201ca8>] evict+0xb0/0x168 [ 79.056835] [<ffffff8008202650>] iput+0x1c0/0x200 [ 79.060228] [<ffffff800820408c>] iget_failed+0x30/0x3c [ 79.064097] [<ffffff8000eba0c0>] jffs2_iget+0x2d8/0x360 [jffs2] [ 79.068740] [<ffffff8000eb0a60>] jffs2_lookup+0xe8/0x130 [jffs2] [ 79.073434] [<ffffff80081f1a28>] lookup_slow+0x118/0x190 [ 79.077435] [<ffffff80081f4708>] walk_component+0xfc/0x28c [ 79.081610] [<ffffff80081f4dd0>] path_lookupat+0x84/0x108 [ 79.085699] [<ffffff80081f5578>] filename_lookup+0x88/0x100 [ 79.089960] [<ffffff80081f572c>] user_path_at_empty+0x58/0x6c [ 79.094396] [<ffffff80081ebe14>] vfs_statx+0xa4/0x114 [ 79.098138] [<ffffff80081ec44c>] SyS_newfstatat+0x58/0x98 [ 79.102227] [<ffffff800808354c>] __sys_trace_return+0x0/0x4 [ 79.106489] Code: d65f03c0 f9400001 b40000e1 aa0103e0 (f9400821) The jffs2_do_clear_inode() call in jffs2_iget() is unnecessary since iget_failed() will eventually call jffs2_do_clear_inode() if needed, so just remove it. Fixes: 5451f79 ("iget: stop JFFS2 from using iget() and read_inode()") Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Jake Daryll Obina <jake.obina@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit 2c0aa08 ] Scenario: 1. Port down and do fail over 2. Ap do rds_bind syscall PID: 47039 TASK: ffff89887e2fe640 CPU: 47 COMMAND: "kworker/u:6" #0 [ffff898e35f159f0] machine_kexec at ffffffff8103abf9 #1 [ffff898e35f15a60] crash_kexec at ffffffff810b96e3 #2 [ffff898e35f15b30] oops_end at ffffffff8150f518 #3 [ffff898e35f15b60] no_context at ffffffff8104854c #4 [ffff898e35f15ba0] __bad_area_nosemaphore at ffffffff81048675 #5 [ffff898e35f15bf0] bad_area_nosemaphore at ffffffff810487d3 #6 [ffff898e35f15c00] do_page_fault at ffffffff815120b8 #7 [ffff898e35f15d10] page_fault at ffffffff8150ea95 [exception RIP: unknown or invalid address] RIP: 0000000000000000 RSP: ffff898e35f15dc8 RFLAGS: 00010282 RAX: 00000000fffffffe RBX: ffff889b77f6fc00 RCX:ffffffff81c99d88 RDX: 0000000000000000 RSI: ffff896019ee08e8 RDI:ffff889b77f6fc00 RBP: ffff898e35f15df0 R8: ffff896019ee08c8 R9:0000000000000000 R10: 0000000000000400 R11: 0000000000000000 R12:ffff896019ee08c0 R13: ffff889b77f6fe68 R14: ffffffff81c99d80 R15: ffffffffa022a1e0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffff898e35f15dc8] cma_ndev_work_handler at ffffffffa022a228 [rdma_cm] #9 [ffff898e35f15df8] process_one_work at ffffffff8108a7c6 #10 [ffff898e35f15e58] worker_thread at ffffffff8108bda0 #11 [ffff898e35f15ee8] kthread at ffffffff81090fe6 PID: 45659 TASK: ffff880d313d2500 CPU: 31 COMMAND: "oracle_45659_ap" #0 [ffff881024ccfc98] __schedule at ffffffff8150bac4 #1 [ffff881024ccfd40] schedule at ffffffff8150c2cf #2 [ffff881024ccfd50] __mutex_lock_slowpath at ffffffff8150cee7 #3 [ffff881024ccfdc0] mutex_lock at ffffffff8150cdeb #4 [ffff881024ccfde0] rdma_destroy_id at ffffffffa022a027 [rdma_cm] #5 [ffff881024ccfe10] rds_ib_laddr_check at ffffffffa0357857 [rds_rdma] #6 [ffff881024ccfe50] rds_trans_get_preferred at ffffffffa0324c2a [rds] #7 [ffff881024ccfe80] rds_bind at ffffffffa031d690 [rds] #8 [ffff881024ccfeb0] sys_bind at ffffffff8142a670 PID: 45659 PID: 47039 rds_ib_laddr_check /* create id_priv with a null event_handler */ rdma_create_id rdma_bind_addr cma_acquire_dev /* add id_priv to cma_dev->id_list */ cma_attach_to_dev cma_ndev_work_handler /* event_hanlder is null */ id_priv->id.event_handler Signed-off-by: Guanglei Li <guanglei.li@oracle.com> Signed-off-by: Honglei Wang <honglei.wang@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Yanjun Zhu <yanjun.zhu@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Acked-by: Doug Ledford <dledford@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit b6dd4d8 ] The pr_debug() in gic-v3 gic_send_sgi() can trigger a circular locking warning: GICv3: CPU10: ICC_SGI1R_EL1 5000400 ====================================================== WARNING: possible circular locking dependency detected 4.15.0+ #1 Tainted: G W ------------------------------------------------------ dynamic_debug01/1873 is trying to acquire lock: ((console_sem).lock){-...}, at: [<0000000099c891ec>] down_trylock+0x20/0x4c but task is already holding lock: (&rq->lock){-.-.}, at: [<00000000842e1587>] __task_rq_lock+0x54/0xdc which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&rq->lock){-.-.}: __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock+0x4c/0x60 task_fork_fair+0x3c/0x148 sched_fork+0x10c/0x214 copy_process.isra.32.part.33+0x4e8/0x14f0 _do_fork+0xe8/0x78c kernel_thread+0x48/0x54 rest_init+0x34/0x2a4 start_kernel+0x45c/0x488 -> #1 (&p->pi_lock){-.-.}: __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock_irqsave+0x58/0x70 try_to_wake_up+0x48/0x600 wake_up_process+0x28/0x34 __up.isra.0+0x60/0x6c up+0x60/0x68 __up_console_sem+0x4c/0x7c console_unlock+0x328/0x634 vprintk_emit+0x25c/0x390 dev_vprintk_emit+0xc4/0x1fc dev_printk_emit+0x88/0xa8 __dev_printk+0x58/0x9c _dev_info+0x84/0xa8 usb_new_device+0x100/0x474 hub_port_connect+0x280/0x92c hub_event+0x740/0xa84 process_one_work+0x240/0x70c worker_thread+0x60/0x400 kthread+0x110/0x13c ret_from_fork+0x10/0x18 -> #0 ((console_sem).lock){-...}: validate_chain.isra.34+0x6e4/0xa20 __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock_irqsave+0x58/0x70 down_trylock+0x20/0x4c __down_trylock_console_sem+0x3c/0x9c console_trylock+0x20/0xb0 vprintk_emit+0x254/0x390 vprintk_default+0x58/0x90 vprintk_func+0xbc/0x164 printk+0x80/0xa0 __dynamic_pr_debug+0x84/0xac gic_raise_softirq+0x184/0x18c smp_cross_call+0xac/0x218 smp_send_reschedule+0x3c/0x48 resched_curr+0x60/0x9c check_preempt_curr+0x70/0xdc wake_up_new_task+0x310/0x470 _do_fork+0x188/0x78c SyS_clone+0x44/0x50 __sys_trace_return+0x0/0x4 other info that might help us debug this: Chain exists of: (console_sem).lock --> &p->pi_lock --> &rq->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&rq->lock); lock(&p->pi_lock); lock(&rq->lock); lock((console_sem).lock); *** DEADLOCK *** 2 locks held by dynamic_debug01/1873: #0: (&p->pi_lock){-.-.}, at: [<000000001366df53>] wake_up_new_task+0x40/0x470 #1: (&rq->lock){-.-.}, at: [<00000000842e1587>] __task_rq_lock+0x54/0xdc stack backtrace: CPU: 10 PID: 1873 Comm: dynamic_debug01 Tainted: G W 4.15.0+ #1 Hardware name: GIGABYTE R120-T34-00/MT30-GS2-00, BIOS T48 10/02/2017 Call trace: dump_backtrace+0x0/0x188 show_stack+0x24/0x2c dump_stack+0xa4/0xe0 print_circular_bug.isra.31+0x29c/0x2b8 check_prev_add.constprop.39+0x6c8/0x6dc validate_chain.isra.34+0x6e4/0xa20 __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock_irqsave+0x58/0x70 down_trylock+0x20/0x4c __down_trylock_console_sem+0x3c/0x9c console_trylock+0x20/0xb0 vprintk_emit+0x254/0x390 vprintk_default+0x58/0x90 vprintk_func+0xbc/0x164 printk+0x80/0xa0 __dynamic_pr_debug+0x84/0xac gic_raise_softirq+0x184/0x18c smp_cross_call+0xac/0x218 smp_send_reschedule+0x3c/0x48 resched_curr+0x60/0x9c check_preempt_curr+0x70/0xdc wake_up_new_task+0x310/0x470 _do_fork+0x188/0x78c SyS_clone+0x44/0x50 __sys_trace_return+0x0/0x4 GICv3: CPU0: ICC_SGI1R_EL1 12000 This could be fixed with printk_deferred() but that might lessen its usefulness for debugging. So change it to pr_devel to keep it out of production kernels. Developers working on gic-v3 can enable it as needed in their kernels. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit 3de59bb ] In handle_write_finished(), if r1_bio->bios[m] != NULL, it thinks the corresponding conf->mirrors[m].rdev is also not NULL. But, it is not always true. Even if some io hold replacement rdev(i.e. rdev->nr_pending.count > 0), raid1_remove_disk() can also set the rdev as NULL. That means, bios[m] != NULL, but mirrors[m].rdev is NULL, resulting in NULL pointer dereference in handle_write_finished and sync_request_write. This patch can fix BUGs as follows: BUG: unable to handle kernel NULL pointer dereference at 0000000000000140 IP: [<ffffffff815bbbbd>] raid1d+0x2bd/0xfc0 PGD 12ab52067 PUD 12f587067 PMD 0 Oops: 0000 [#1] SMP CPU: 1 PID: 2008 Comm: md3_raid1 Not tainted 4.1.44+ rockchip-linux#130 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014 Call Trace: ? schedule+0x37/0x90 ? prepare_to_wait_event+0x83/0xf0 md_thread+0x144/0x150 ? wake_atomic_t_function+0x70/0x70 ? md_start_sync+0xf0/0xf0 kthread+0xd8/0xf0 ? kthread_worker_fn+0x160/0x160 ret_from_fork+0x42/0x70 ? kthread_worker_fn+0x160/0x160 BUG: unable to handle kernel NULL pointer dereference at 00000000000000b8 IP: sync_request_write+0x9e/0x980 PGD 800000007c518067 P4D 800000007c518067 PUD 8002b067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 24 PID: 2549 Comm: md3_raid1 Not tainted 4.15.0+ rockchip-linux#118 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014 Call Trace: ? sched_clock+0x5/0x10 ? sched_clock_cpu+0xc/0xb0 ? flush_pending_writes+0x3a/0xd0 ? pick_next_task_fair+0x4d5/0x5f0 ? __switch_to+0xa2/0x430 raid1d+0x65a/0x870 ? find_pers+0x70/0x70 ? find_pers+0x70/0x70 ? md_thread+0x11c/0x160 md_thread+0x11c/0x160 ? finish_wait+0x80/0x80 kthread+0x111/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ? do_syscall_64+0x6f/0x190 ? SyS_exit_group+0x10/0x10 ret_from_fork+0x35/0x40 Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit 60eb34e ] Kernel crashed when run fio in a RAID5 backend bcache device, the call trace is bellow: [ 440.012034] kernel BUG at block/blk-ioc.c:146! [ 440.012696] invalid opcode: 0000 [#1] SMP NOPTI [ 440.026537] CPU: 2 PID: 2205 Comm: md127_raid5 Not tainted 4.15.0 #8 [ 440.027441] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 07/16 /2015 [ 440.028615] RIP: 0010:put_io_context+0x8b/0x90 [ 440.029246] RSP: 0018:ffffa8c882b43af8 EFLAGS: 00010246 [ 440.029990] RAX: 0000000000000000 RBX: ffffa8c88294fca0 RCX: 0000000000 0f4240 [ 440.031006] RDX: 0000000000000004 RSI: 0000000000000286 RDI: ffffa8c882 94fca0 [ 440.032030] RBP: ffffa8c882b43b10 R08: 0000000000000003 R09: ffff949cb8 0c1700 [ 440.033206] R10: 0000000000000104 R11: 000000000000b71c R12: 00000000000 01000 [ 440.034222] R13: 0000000000000000 R14: ffff949cad84db70 R15: ffff949cb11 bd1e0 [ 440.035239] FS: 0000000000000000(0000) GS:ffff949cba280000(0000) knlGS: 0000000000000000 [ 440.060190] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 440.084967] CR2: 00007ff0493ef000 CR3: 00000002f1e0a002 CR4: 00000000001 606e0 [ 440.110498] Call Trace: [ 440.135443] bio_disassociate_task+0x1b/0x60 [ 440.160355] bio_free+0x1b/0x60 [ 440.184666] bio_put+0x23/0x30 [ 440.208272] search_free+0x23/0x40 [bcache] [ 440.231448] cached_dev_write_complete+0x31/0x70 [bcache] [ 440.254468] closure_put+0xb6/0xd0 [bcache] [ 440.277087] request_endio+0x30/0x40 [bcache] [ 440.298703] bio_endio+0xa1/0x120 [ 440.319644] handle_stripe+0x418/0x2270 [raid456] [ 440.340614] ? load_balance+0x17b/0x9c0 [ 440.360506] handle_active_stripes.isra.58+0x387/0x5a0 [raid456] [ 440.380675] ? __release_stripe+0x15/0x20 [raid456] [ 440.400132] raid5d+0x3ed/0x5d0 [raid456] [ 440.419193] ? schedule+0x36/0x80 [ 440.437932] ? schedule_timeout+0x1d2/0x2f0 [ 440.456136] md_thread+0x122/0x150 [ 440.473687] ? wait_woken+0x80/0x80 [ 440.491411] kthread+0x102/0x140 [ 440.508636] ? find_pers+0x70/0x70 [ 440.524927] ? kthread_associate_blkcg+0xa0/0xa0 [ 440.541791] ret_from_fork+0x35/0x40 [ 440.558020] Code: c2 48 00 5b 41 5c 41 5d 5d c3 48 89 c6 4c 89 e7 e8 bb c2 48 00 48 8b 3d bc 36 4b 01 48 89 de e8 7c f7 e0 ff 5b 41 5c 41 5d 5d c3 <0f> 0b 0f 1f 00 0f 1f 44 00 00 55 48 8d 47 b8 48 89 e5 41 57 41 [ 440.610020] RIP: put_io_context+0x8b/0x90 RSP: ffffa8c882b43af8 [ 440.628575] ---[ end trace a1fd79d85643a73e ]-- All the crash issue happened when a bypass IO coming, in such scenario s->iop.bio is pointed to the s->orig_bio. In search_free(), it finishes the s->orig_bio by calling bio_complete(), and after that, s->iop.bio became invalid, then kernel would crash when calling bio_put(). Maybe its upper layer's faulty, since bio should not be freed before we calling bio_put(), but we'd better calling bio_put() first before calling bio_complete() to notify upper layer ending this bio. This patch moves bio_complete() under bio_put() to avoid kernel crash. [mlyle: fixed commit subject for character limits] Reported-by: Matthias Ferdinand <bcache@mfedv.net> Tested-by: Matthias Ferdinand <bcache@mfedv.net> Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit ae47457 ] In some situation vlan packets do not have ethernet headers. One example is packets from tun devices. Users can specify vlan protocol in tun_pi field instead of IP protocol, and skb_vlan_untag() attempts to untag such packets. skb_vlan_untag() (more precisely, skb_reorder_vlan_header() called by it) however did not expect packets without ethernet headers, so in such a case size argument for memmove() underflowed and triggered crash. ==== BUG: unable to handle kernel paging request at ffff8801cccb8000 IP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 PGD 9cee067 P4D 9cee067 PUD 1d9401063 PMD 1cccb7063 PTE 2810100028101 Oops: 000b [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 17663 Comm: syz-executor2 Not tainted 4.16.0-rc7+ rockchip-linux#368 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 RSP: 0018:ffff8801cc046e28 EFLAGS: 00010287 RAX: ffff8801ccc244c4 RBX: fffffffffffffffe RCX: fffffffffff6c4c2 RDX: fffffffffffffffe RSI: ffff8801cccb7ffc RDI: ffff8801cccb8000 RBP: ffff8801cc046e48 R08: ffff8801ccc244be R09: ffffed0039984899 R10: 0000000000000001 R11: ffffed0039984898 R12: ffff8801ccc244c4 R13: ffff8801ccc244c0 R14: ffff8801d96b7c06 R15: ffff8801d96b7b40 FS: 00007febd562d700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8801cccb8000 CR3: 00000001ccb2f006 CR4: 00000000001606e0 DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Call Trace: memmove include/linux/string.h:360 [inline] skb_reorder_vlan_header net/core/skbuff.c:5031 [inline] skb_vlan_untag+0x470/0xc40 net/core/skbuff.c:5061 __netif_receive_skb_core+0x119c/0x3460 net/core/dev.c:4460 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4627 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4701 netif_receive_skb+0xae/0x390 net/core/dev.c:4725 tun_rx_batched.isra.50+0x5ee/0x870 drivers/net/tun.c:1555 tun_get_user+0x299e/0x3c20 drivers/net/tun.c:1962 tun_chr_write_iter+0xb9/0x160 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x684/0x970 fs/read_write.c:482 vfs_write+0x189/0x510 fs/read_write.c:544 SYSC_write fs/read_write.c:589 [inline] SyS_write+0xef/0x220 fs/read_write.c:581 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x454879 RSP: 002b:00007febd562cc68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007febd562d6d4 RCX: 0000000000454879 RDX: 0000000000000157 RSI: 0000000020000180 RDI: 0000000000000014 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000006b0 R14: 00000000006fc120 R15: 0000000000000000 Code: 90 90 90 90 90 90 90 48 89 f8 48 83 fa 20 0f 82 03 01 00 00 48 39 fe 7d 0f 49 89 f0 49 01 d0 49 39 f8 0f 8f 9f 00 00 00 48 89 d1 <f3> a4 c3 48 81 fa a8 02 00 00 72 05 40 38 fe 74 3b 48 83 ea 20 RIP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 RSP: ffff8801cc046e28 CR2: ffff8801cccb8000 ==== We don't need to copy headers for packets which do not have preceding headers of vlan headers, so skip memmove() in that case. Fixes: 4bbb3e0 ("net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit 2d097c5 ] We can't just use scsi_cd() to get the scsi_cd structure, we have to grab a live reference to the device. For both callbacks, we're not inside an open where we already hold a reference to the device. This fixes device removal/addition under concurrent device access, which otherwise could result in the below oops. NULL pointer dereference at 0000000000000010 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: sr 12:0:0:0: [sr2] scsi-1 drive scsi_debug crc_t10dif crct10dif_generic crct10dif_common nvme nvme_core sb_edac xl sr 12:0:0:0: Attached scsi CD-ROM sr2 sr_mod cdrom btrfs xor zstd_decompress zstd_compress xxhash lzo_compress zlib_defc sr 12:0:0:0: Attached scsi generic sg7 type 5 igb ahci libahci i2c_algo_bit libata dca [last unloaded: crc_t10dif] CPU: 43 PID: 4629 Comm: systemd-udevd Not tainted 4.16.0+ #650 Hardware name: Dell Inc. PowerEdge T630/0NT78X, BIOS 2.3.4 11/09/2016 RIP: 0010:sr_block_revalidate_disk+0x23/0x190 [sr_mod] RSP: 0018:ffff883ff357bb58 EFLAGS: 00010292 RAX: ffffffffa00b07d0 RBX: ffff883ff3058000 RCX: ffff883ff357bb66 RDX: 0000000000000003 RSI: 0000000000007530 RDI: ffff881fea631000 RBP: 0000000000000000 R08: ffff881fe4d38400 R09: 0000000000000000 R10: 0000000000000000 R11: 00000000000001b6 R12: 000000000800005d R13: 000000000800005d R14: ffff883ffd9b3790 R15: 0000000000000000 FS: 00007f7dc8e6d8c0(0000) GS:ffff883fff340000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000003ffda98005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? __invalidate_device+0x48/0x60 check_disk_change+0x4c/0x60 sr_block_open+0x16/0xd0 [sr_mod] __blkdev_get+0xb9/0x450 ? iget5_locked+0x1c0/0x1e0 blkdev_get+0x11e/0x320 ? bdget+0x11d/0x150 ? _raw_spin_unlock+0xa/0x20 ? bd_acquire+0xc0/0xc0 do_dentry_open+0x1b0/0x320 ? inode_permission+0x24/0xc0 path_openat+0x4e6/0x1420 ? cpumask_any_but+0x1f/0x40 ? flush_tlb_mm_range+0xa0/0x120 do_filp_open+0x8c/0xf0 ? __seccomp_filter+0x28/0x230 ? _raw_spin_unlock+0xa/0x20 ? __handle_mm_fault+0x7d6/0x9b0 ? list_lru_add+0xa8/0xc0 ? _raw_spin_unlock+0xa/0x20 ? __alloc_fd+0xaf/0x160 ? do_sys_open+0x1a6/0x230 do_sys_open+0x1a6/0x230 do_syscall_64+0x5a/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit 1c6b41f ] If a recursive IOP_RESET is invoked, usually due to the eh_thread handling errors after the first reset, be sure we flag that the command thread has been stopped to avoid an Oops of the form; [ 336.620256] CPU: 28 PID: 1193 Comm: scsi_eh_0 Kdump: loaded Not tainted 4.14.0-49.el7a.ppc64le #1 [ 336.620297] task: c000003fd630b800 task.stack: c000003fd61a4000 [ 336.620326] NIP: c000000000176794 LR: c00000000013038c CTR: c00000000024bc10 [ 336.620361] REGS: c000003fd61a7720 TRAP: 0300 Not tainted (4.14.0-49.el7a.ppc64le) [ 336.620395] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 22084022 XER: 20040000 [ 336.620435] CFAR: c000000000130388 DAR: 0000000000000000 DSISR: 40000000 SOFTE: 1 [ 336.620435] GPR00: c00000000013038c c000003fd61a79a0 c0000000014c7e00 0000000000000000 [ 336.620435] GPR04: 000000000000000c 000000000000000c 9000000000009033 0000000000000477 [ 336.620435] GPR08: 0000000000000477 0000000000000000 0000000000000000 c008000010f7d940 [ 336.620435] GPR12: c00000000024bc10 c000000007a33400 c0000000001708a8 c000003fe3b881d8 [ 336.620435] GPR16: c000003fe3b88060 c000003fd61a7d10 fffffffffffff000 000000000000001e [ 336.620435] GPR20: 0000000000000001 c000000000ebf1a0 0000000000000001 c000003fe3b88000 [ 336.620435] GPR24: 0000000000000003 0000000000000002 c000003fe3b88840 c000003fe3b887e8 [ 336.620435] GPR28: c000003fe3b88000 c000003fc8181788 0000000000000000 c000003fc8181700 [ 336.620750] NIP [c000000000176794] exit_creds+0x34/0x160 [ 336.620775] LR [c00000000013038c] __put_task_struct+0x8c/0x1f0 [ 336.620804] Call Trace: [ 336.620817] [c000003fd61a79a0] [c000003fe3b88000] 0xc000003fe3b88000 (unreliable) [ 336.620853] [c000003fd61a79d0] [c00000000013038c] __put_task_struct+0x8c/0x1f0 [ 336.620889] [c000003fd61a7a00] [c000000000171418] kthread_stop+0x1e8/0x1f0 [ 336.620922] [c000003fd61a7a40] [c008000010f7448c] aac_reset_adapter+0x14c/0x8d0 [aacraid] [ 336.620959] [c000003fd61a7b00] [c008000010f60174] aac_eh_host_reset+0x84/0x100 [aacraid] [ 336.621010] [c000003fd61a7b30] [c000000000864f24] scsi_try_host_reset+0x74/0x180 [ 336.621046] [c000003fd61a7bb0] [c000000000867ac0] scsi_eh_ready_devs+0xc00/0x14d0 [ 336.625165] [c000003fd61a7ca0] [c0000000008699e0] scsi_error_handler+0x550/0x730 [ 336.632101] [c000003fd61a7dc0] [c000000000170a08] kthread+0x168/0x1b0 [ 336.639031] [c000003fd61a7e30] [c00000000000b528] ret_from_kernel_thread+0x5c/0xb4 [ 336.645971] Instruction dump: [ 336.648743] 384216a0 7c0802a6 fbe1fff8 f8010010 f821ffd1 7c7f1b78 60000000 60000000 [ 336.657056] 39400000 e87f0838 f95f0838 7c0004ac <7d401828> 314affff 7d40192d 40c2fff4 [ 336.663997] -[ end trace 4640cf8d4945ad95 ]- So flag when the thread is stopped by setting the thread pointer to NULL. Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit 8a5a916 ] While running btrfs/011, I hit the following lockdep splat. This is the important bit: pcpu_alloc+0x1ac/0x5e0 __percpu_counter_init+0x4e/0xb0 btrfs_init_fs_root+0x99/0x1c0 [btrfs] btrfs_get_fs_root.part.54+0x5b/0x150 [btrfs] resolve_indirect_refs+0x130/0x830 [btrfs] find_parent_nodes+0x69e/0xff0 [btrfs] btrfs_find_all_roots_safe+0xa0/0x110 [btrfs] btrfs_find_all_roots+0x50/0x70 [btrfs] btrfs_qgroup_prepare_account_extents+0x53/0x90 [btrfs] btrfs_commit_transaction+0x3ce/0x9b0 [btrfs] The percpu_counter_init call in btrfs_alloc_subvolume_writers uses GFP_KERNEL, which we can't do during transaction commit. This switches it to GFP_NOFS. ======================================================== WARNING: possible irq lock inversion dependency detected 4.12.14-kvmsmall #8 Tainted: G W -------------------------------------------------------- kswapd0/50 just changed the state of lock: (&delayed_node->mutex){+.+.-.}, at: [<ffffffffc06994fa>] __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs] but this lock took another, RECLAIM_FS-unsafe lock in the past: (pcpu_alloc_mutex){+.+.+.} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Chain exists of: &delayed_node->mutex --> &found->groups_sem --> pcpu_alloc_mutex Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(pcpu_alloc_mutex); local_irq_disable(); lock(&delayed_node->mutex); lock(&found->groups_sem); <Interrupt> lock(&delayed_node->mutex); *** DEADLOCK *** 2 locks held by kswapd0/50: #0: (shrinker_rwsem){++++..}, at: [<ffffffff811dc11f>] shrink_slab+0x7f/0x5b0 #1: (&type->s_umount_key#30){+++++.}, at: [<ffffffff8126dec6>] trylock_super+0x16/0x50 the shortest dependencies between 2nd lock and 1st lock: -> (pcpu_alloc_mutex){+.+.+.} ops: 4904 { HARDIRQ-ON-W at: __mutex_lock+0x4e/0x8c0 pcpu_alloc+0x1ac/0x5e0 alloc_kmem_cache_cpus.isra.70+0x25/0xa0 __do_tune_cpucache+0x2c/0x220 do_tune_cpucache+0x26/0xc0 enable_cpucache+0x6d/0xf0 kmem_cache_init_late+0x42/0x75 start_kernel+0x343/0x4cb x86_64_start_kernel+0x127/0x134 secondary_startup_64+0xa5/0xb0 SOFTIRQ-ON-W at: __mutex_lock+0x4e/0x8c0 pcpu_alloc+0x1ac/0x5e0 alloc_kmem_cache_cpus.isra.70+0x25/0xa0 __do_tune_cpucache+0x2c/0x220 do_tune_cpucache+0x26/0xc0 enable_cpucache+0x6d/0xf0 kmem_cache_init_late+0x42/0x75 start_kernel+0x343/0x4cb x86_64_start_kernel+0x127/0x134 secondary_startup_64+0xa5/0xb0 RECLAIM_FS-ON-W at: __kmalloc+0x47/0x310 pcpu_extend_area_map+0x2b/0xc0 pcpu_alloc+0x3ec/0x5e0 alloc_kmem_cache_cpus.isra.70+0x25/0xa0 __do_tune_cpucache+0x2c/0x220 do_tune_cpucache+0x26/0xc0 enable_cpucache+0x6d/0xf0 __kmem_cache_create+0x1bf/0x390 create_cache+0xba/0x1b0 kmem_cache_create+0x1f8/0x2b0 ksm_init+0x6f/0x19d do_one_initcall+0x50/0x1b0 kernel_init_freeable+0x201/0x289 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 INITIAL USE at: __mutex_lock+0x4e/0x8c0 pcpu_alloc+0x1ac/0x5e0 alloc_kmem_cache_cpus.isra.70+0x25/0xa0 setup_cpu_cache+0x2f/0x1f0 __kmem_cache_create+0x1bf/0x390 create_boot_cache+0x8b/0xb1 kmem_cache_init+0xa1/0x19e start_kernel+0x270/0x4cb x86_64_start_kernel+0x127/0x134 secondary_startup_64+0xa5/0xb0 } ... key at: [<ffffffff821d8e70>] pcpu_alloc_mutex+0x70/0xa0 ... acquired at: pcpu_alloc+0x1ac/0x5e0 __percpu_counter_init+0x4e/0xb0 btrfs_init_fs_root+0x99/0x1c0 [btrfs] btrfs_get_fs_root.part.54+0x5b/0x150 [btrfs] resolve_indirect_refs+0x130/0x830 [btrfs] find_parent_nodes+0x69e/0xff0 [btrfs] btrfs_find_all_roots_safe+0xa0/0x110 [btrfs] btrfs_find_all_roots+0x50/0x70 [btrfs] btrfs_qgroup_prepare_account_extents+0x53/0x90 [btrfs] btrfs_commit_transaction+0x3ce/0x9b0 [btrfs] transaction_kthread+0x176/0x1b0 [btrfs] kthread+0x102/0x140 ret_from_fork+0x3a/0x50 -> (&fs_info->commit_root_sem){++++..} ops: 1566382 { HARDIRQ-ON-W at: down_write+0x3e/0xa0 cache_block_group+0x287/0x420 [btrfs] find_free_extent+0x106c/0x12d0 [btrfs] btrfs_reserve_extent+0xd8/0x170 [btrfs] cow_file_range.isra.66+0x133/0x470 [btrfs] run_delalloc_range+0x121/0x410 [btrfs] writepage_delalloc.isra.50+0xfe/0x180 [btrfs] __extent_writepage+0x19a/0x360 [btrfs] extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs] extent_writepages+0x4d/0x60 [btrfs] do_writepages+0x1a/0x70 __filemap_fdatawrite_range+0xa7/0xe0 btrfs_rename+0x5ee/0xdb0 [btrfs] vfs_rename+0x52a/0x7e0 SyS_rename+0x351/0x3b0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 HARDIRQ-ON-R at: down_read+0x35/0x90 caching_thread+0x57/0x560 [btrfs] normal_work_helper+0x1c0/0x5e0 [btrfs] process_one_work+0x1e0/0x5c0 worker_thread+0x44/0x390 kthread+0x102/0x140 ret_from_fork+0x3a/0x50 SOFTIRQ-ON-W at: down_write+0x3e/0xa0 cache_block_group+0x287/0x420 [btrfs] find_free_extent+0x106c/0x12d0 [btrfs] btrfs_reserve_extent+0xd8/0x170 [btrfs] cow_file_range.isra.66+0x133/0x470 [btrfs] run_delalloc_range+0x121/0x410 [btrfs] writepage_delalloc.isra.50+0xfe/0x180 [btrfs] __extent_writepage+0x19a/0x360 [btrfs] extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs] extent_writepages+0x4d/0x60 [btrfs] do_writepages+0x1a/0x70 __filemap_fdatawrite_range+0xa7/0xe0 btrfs_rename+0x5ee/0xdb0 [btrfs] vfs_rename+0x52a/0x7e0 SyS_rename+0x351/0x3b0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 SOFTIRQ-ON-R at: down_read+0x35/0x90 caching_thread+0x57/0x560 [btrfs] normal_work_helper+0x1c0/0x5e0 [btrfs] process_one_work+0x1e0/0x5c0 worker_thread+0x44/0x390 kthread+0x102/0x140 ret_from_fork+0x3a/0x50 INITIAL USE at: down_write+0x3e/0xa0 cache_block_group+0x287/0x420 [btrfs] find_free_extent+0x106c/0x12d0 [btrfs] btrfs_reserve_extent+0xd8/0x170 [btrfs] cow_file_range.isra.66+0x133/0x470 [btrfs] run_delalloc_range+0x121/0x410 [btrfs] writepage_delalloc.isra.50+0xfe/0x180 [btrfs] __extent_writepage+0x19a/0x360 [btrfs] extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs] extent_writepages+0x4d/0x60 [btrfs] do_writepages+0x1a/0x70 __filemap_fdatawrite_range+0xa7/0xe0 btrfs_rename+0x5ee/0xdb0 [btrfs] vfs_rename+0x52a/0x7e0 SyS_rename+0x351/0x3b0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 } ... key at: [<ffffffffc0729578>] __key.61970+0x0/0xfffffffffff9aa88 [btrfs] ... acquired at: cache_block_group+0x287/0x420 [btrfs] find_free_extent+0x106c/0x12d0 [btrfs] btrfs_reserve_extent+0xd8/0x170 [btrfs] btrfs_alloc_tree_block+0x12f/0x4c0 [btrfs] btrfs_create_tree+0xbb/0x2a0 [btrfs] btrfs_create_uuid_tree+0x37/0x140 [btrfs] open_ctree+0x23c0/0x2660 [btrfs] btrfs_mount+0xd36/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 btrfs_mount+0x18c/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 do_mount+0x1c1/0xcc0 SyS_mount+0x7e/0xd0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 -> (&found->groups_sem){++++..} ops: 2134587 { HARDIRQ-ON-W at: down_write+0x3e/0xa0 __link_block_group+0x34/0x130 [btrfs] btrfs_read_block_groups+0x33d/0x7b0 [btrfs] open_ctree+0x2054/0x2660 [btrfs] btrfs_mount+0xd36/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 btrfs_mount+0x18c/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 do_mount+0x1c1/0xcc0 SyS_mount+0x7e/0xd0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 HARDIRQ-ON-R at: down_read+0x35/0x90 btrfs_calc_num_tolerated_disk_barrier_failures+0x113/0x1f0 [btrfs] open_ctree+0x207b/0x2660 [btrfs] btrfs_mount+0xd36/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 btrfs_mount+0x18c/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 do_mount+0x1c1/0xcc0 SyS_mount+0x7e/0xd0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 SOFTIRQ-ON-W at: down_write+0x3e/0xa0 __link_block_group+0x34/0x130 [btrfs] btrfs_read_block_groups+0x33d/0x7b0 [btrfs] open_ctree+0x2054/0x2660 [btrfs] btrfs_mount+0xd36/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 btrfs_mount+0x18c/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 do_mount+0x1c1/0xcc0 SyS_mount+0x7e/0xd0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 SOFTIRQ-ON-R at: down_read+0x35/0x90 btrfs_calc_num_tolerated_disk_barrier_failures+0x113/0x1f0 [btrfs] open_ctree+0x207b/0x2660 [btrfs] btrfs_mount+0xd36/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 btrfs_mount+0x18c/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 do_mount+0x1c1/0xcc0 SyS_mount+0x7e/0xd0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 INITIAL USE at: down_write+0x3e/0xa0 __link_block_group+0x34/0x130 [btrfs] btrfs_read_block_groups+0x33d/0x7b0 [btrfs] open_ctree+0x2054/0x2660 [btrfs] btrfs_mount+0xd36/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 btrfs_mount+0x18c/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 do_mount+0x1c1/0xcc0 SyS_mount+0x7e/0xd0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 } ... key at: [<ffffffffc0729488>] __key.59101+0x0/0xfffffffffff9ab78 [btrfs] ... acquired at: find_free_extent+0xcb4/0x12d0 [btrfs] btrfs_reserve_extent+0xd8/0x170 [btrfs] btrfs_alloc_tree_block+0x12f/0x4c0 [btrfs] __btrfs_cow_block+0x110/0x5b0 [btrfs] btrfs_cow_block+0xd7/0x290 [btrfs] btrfs_search_slot+0x1f6/0x960 [btrfs] btrfs_lookup_inode+0x2a/0x90 [btrfs] __btrfs_update_delayed_inode+0x65/0x210 [btrfs] btrfs_commit_inode_delayed_inode+0x121/0x130 [btrfs] btrfs_evict_inode+0x3fe/0x6a0 [btrfs] evict+0xc4/0x190 __dentry_kill+0xbf/0x170 dput+0x2ae/0x2f0 SyS_rename+0x2a6/0x3b0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 -> (&delayed_node->mutex){+.+.-.} ops: 5580204 { HARDIRQ-ON-W at: __mutex_lock+0x4e/0x8c0 btrfs_delayed_update_inode+0x46/0x6e0 [btrfs] btrfs_update_inode+0x83/0x110 [btrfs] btrfs_dirty_inode+0x62/0xe0 [btrfs] touch_atime+0x8c/0xb0 do_generic_file_read+0x818/0xb10 __vfs_read+0xdc/0x150 vfs_read+0x8a/0x130 SyS_read+0x45/0xa0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 SOFTIRQ-ON-W at: __mutex_lock+0x4e/0x8c0 btrfs_delayed_update_inode+0x46/0x6e0 [btrfs] btrfs_update_inode+0x83/0x110 [btrfs] btrfs_dirty_inode+0x62/0xe0 [btrfs] touch_atime+0x8c/0xb0 do_generic_file_read+0x818/0xb10 __vfs_read+0xdc/0x150 vfs_read+0x8a/0x130 SyS_read+0x45/0xa0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 IN-RECLAIM_FS-W at: __mutex_lock+0x4e/0x8c0 __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs] btrfs_evict_inode+0x22c/0x6a0 [btrfs] evict+0xc4/0x190 dispose_list+0x35/0x50 prune_icache_sb+0x42/0x50 super_cache_scan+0x139/0x190 shrink_slab+0x262/0x5b0 shrink_node+0x2eb/0x2f0 kswapd+0x2eb/0x890 kthread+0x102/0x140 ret_from_fork+0x3a/0x50 INITIAL USE at: __mutex_lock+0x4e/0x8c0 btrfs_delayed_update_inode+0x46/0x6e0 [btrfs] btrfs_update_inode+0x83/0x110 [btrfs] btrfs_dirty_inode+0x62/0xe0 [btrfs] touch_atime+0x8c/0xb0 do_generic_file_read+0x818/0xb10 __vfs_read+0xdc/0x150 vfs_read+0x8a/0x130 SyS_read+0x45/0xa0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 } ... key at: [<ffffffffc072d488>] __key.56935+0x0/0xfffffffffff96b78 [btrfs] ... acquired at: __lock_acquire+0x264/0x11c0 lock_acquire+0xbd/0x1e0 __mutex_lock+0x4e/0x8c0 __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs] btrfs_evict_inode+0x22c/0x6a0 [btrfs] evict+0xc4/0x190 dispose_list+0x35/0x50 prune_icache_sb+0x42/0x50 super_cache_scan+0x139/0x190 shrink_slab+0x262/0x5b0 shrink_node+0x2eb/0x2f0 kswapd+0x2eb/0x890 kthread+0x102/0x140 ret_from_fork+0x3a/0x50 stack backtrace: CPU: 1 PID: 50 Comm: kswapd0 Tainted: G W 4.12.14-kvmsmall #8 SLE15 (unreleased) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0x78/0xb7 print_irq_inversion_bug.part.38+0x19f/0x1aa check_usage_forwards+0x102/0x120 ? ret_from_fork+0x3a/0x50 ? check_usage_backwards+0x110/0x110 mark_lock+0x16c/0x270 __lock_acquire+0x264/0x11c0 ? pagevec_lookup_entries+0x1a/0x30 ? truncate_inode_pages_range+0x2b3/0x7f0 lock_acquire+0xbd/0x1e0 ? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs] __mutex_lock+0x4e/0x8c0 ? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs] ? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs] ? btrfs_evict_inode+0x1f6/0x6a0 [btrfs] __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs] btrfs_evict_inode+0x22c/0x6a0 [btrfs] evict+0xc4/0x190 dispose_list+0x35/0x50 prune_icache_sb+0x42/0x50 super_cache_scan+0x139/0x190 shrink_slab+0x262/0x5b0 shrink_node+0x2eb/0x2f0 kswapd+0x2eb/0x890 kthread+0x102/0x140 ? mem_cgroup_shrink_node+0x2c0/0x2c0 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x3a/0x50 Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit 0834d62 ] In mpic_physmask() we loop over all CPUs up to 32, then get the hard SMP processor id of that CPU. Currently that's possibly walking off the end of the paca array, but in a future patch we will change the paca array to be an array of pointers, and in that case we will get a NULL for missing CPUs and oops. eg: Unable to handle kernel paging request for data at address 0x88888888888888b8 Faulting instruction address: 0xc00000000004e380 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP .mpic_set_affinity+0x60/0x1a0 LR .irq_do_set_affinity+0x48/0x100 Fix it by checking the CPU is possible, this also fixes the code if there are gaps in the CPU numbering which probably never happens on mpic systems but who knows. Debugged-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit 8b2d93d ] When attempt to run worker (ath10k_sta_rc_update_wk) after the station object (ieee80211_sta) delete will trigger the kernel panic. This problem arise in AP + Mesh configuration, Where the current node AP VAP and neighbor node mesh VAP MAC address are same. When the current mesh node try to establish the mesh link with neighbor node, driver peer creation for the neighbor mesh node fails due to duplication MAC address. Already the AP VAP created with same MAC address. It is caused by the following scenario steps. Steps: 1. In above condition, ath10k driver sta_state callback (ath10k_sta_state) fails to do the state change for a station from IEEE80211_STA_NOTEXIST to IEEE80211_STA_NONE due to peer creation fails. Sta_state callback is called from ieee80211_add_station() to handle the new station (neighbor mesh node) request from the wpa_supplicant. 2. Concurrently ath10k receive the sta_rc_update callback notification from the mesh_neighbour_update() to handle the beacon frames of the above neighbor mesh node. since its atomic callback, ath10k driver queue the work (ath10k_sta_rc_update_wk) to handle rc update. 3. Due to driver sta_state callback fails (step 1), mac80211 free the station object. 4. When the worker (ath10k_sta_rc_update_wk) scheduled to run, it will access the station object which is already deleted. so it will trigger kernel panic. Added the peer exist check in sta_rc_update callback before queue the work. Kernel Panic log: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0204000 [00000000] *pgd=00000000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM CPU: 1 PID: 1833 Comm: kworker/u4:2 Not tainted 3.14.77 #1 task: dcef0000 ti: d72b6000 task.ti: d72b6000 PC is at pwq_activate_delayed_work+0x10/0x40 LR is at pwq_activate_delayed_work+0xc/0x40 pc : [<c023f988>] lr : [<c023f984>] psr: 40000193 sp : d72b7f18 ip : 0000007a fp : d72b6000 r10: 00000000 r9 : dd404414 r8 : d8c31998 r7 : d72b6038 r6 : 00000004 r5 : d4907ec8 r4 : dcee1300 r3 : ffffffe0 r2 : 00000000 r1 : 00000001 r0 : 00000000 Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5787d Table: 595bc06a DAC: 00000015 ... Process kworker/u4:2 (pid: 1833, stack limit = 0xd72b6238) Stack: (0xd72b7f18 to 0xd72b8000) 7f00: 00000001 dcee1300 7f20: 00000001 c02410dc d8c31980 dd404400 dd404400 c0242790 d8c31980 00000089 7f40: 00000000 d93e1340 00000000 d8c31980 c0242568 00000000 00000000 00000000 7f60: 00000000 c02474dc 00000000 00000000 000000f8 d8c31980 00000000 00000000 7f80: d72b7f80 d72b7f80 00000000 00000000 d72b7f90 d72b7f90 d72b7fac d93e1340 7fa0: c0247404 00000000 00000000 c0208d20 00000000 00000000 00000000 00000000 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c023f988>] (pwq_activate_delayed_work) from [<c02410dc>] (pwq_dec_nr_in_flight+0x58/0xc4) [<c02410dc>] (pwq_dec_nr_in_flight) from [<c0242790>] (worker_thread+0x228/0x360) [<c0242790>] (worker_thread) from [<c02474dc>] (kthread+0xd8/0xec) [<c02474dc>] (kthread) from [<c0208d20>] (ret_from_fork+0x14/0x34) Code: e92d4038 e1a05000 ebffffbc[69210.619376] SMP: failed to stop secondary CPUs Rebooting in 3 seconds.. Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit ab60368 ] IMA requires having it's hash algorithm be compiled-in due to it's early use. The default IMA algorithm is protected by Kconfig to be compiled-in. The ima_hash kernel parameter allows to choose the hash algorithm. When the specified algorithm is not available or available as a module, IMA initialization fails, which leads to a kernel panic (mknodat syscall calls ima_post_path_mknod()). Therefore as fallback we force IMA to use the default builtin Kconfig hash algorithm. Fixed crash: $ grep CONFIG_CRYPTO_MD4 .config CONFIG_CRYPTO_MD4=m [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-2.3-default root=UUID=74ae8202-9ca7-4e39-813b-22287ec52f7a video=1024x768-16 plymouth.ignore-serial-consoles console=ttyS0 console=tty resume=/dev/disk/by-path/pci-0000:00:07.0-part3 splash=silent showopts ima_hash=md4 ... [ 1.545190] ima: Can not allocate md4 (reason: -2) ... [ 2.610120] BUG: unable to handle kernel NULL pointer dereference at (null) [ 2.611903] IP: ima_match_policy+0x23/0x390 [ 2.612967] PGD 0 P4D 0 [ 2.613080] Oops: 0000 [#1] SMP [ 2.613080] Modules linked in: autofs4 [ 2.613080] Supported: Yes [ 2.613080] CPU: 0 PID: 1 Comm: systemd Not tainted 4.12.14-2.3-default #1 [ 2.613080] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 [ 2.613080] task: ffff88003e2d0040 task.stack: ffffc90000190000 [ 2.613080] RIP: 0010:ima_match_policy+0x23/0x390 [ 2.613080] RSP: 0018:ffffc90000193e88 EFLAGS: 00010296 [ 2.613080] RAX: 0000000000000000 RBX: 000000000000000c RCX: 0000000000000004 [ 2.613080] RDX: 0000000000000010 RSI: 0000000000000001 RDI: ffff880037071728 [ 2.613080] RBP: 0000000000008000 R08: 0000000000000000 R09: 0000000000000000 [ 2.613080] R10: 0000000000000008 R11: 61c8864680b583eb R12: 00005580ff10086f [ 2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000008000 [ 2.613080] FS: 00007f5c1da08940(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 [ 2.613080] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.613080] CR2: 0000000000000000 CR3: 0000000037002000 CR4: 00000000003406f0 [ 2.613080] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2.613080] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2.613080] Call Trace: [ 2.613080] ? shmem_mknod+0xbf/0xd0 [ 2.613080] ima_post_path_mknod+0x1c/0x40 [ 2.613080] SyS_mknod+0x210/0x220 [ 2.613080] entry_SYSCALL_64_fastpath+0x1a/0xa5 [ 2.613080] RIP: 0033:0x7f5c1bfde570 [ 2.613080] RSP: 002b:00007ffde1c90dc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000085 [ 2.613080] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5c1bfde570 [ 2.613080] RDX: 0000000000000000 RSI: 0000000000008000 RDI: 00005580ff10086f [ 2.613080] RBP: 00007ffde1c91040 R08: 00005580ff10086f R09: 0000000000000000 [ 2.613080] R10: 0000000000104000 R11: 0000000000000246 R12: 00005580ffb99660 [ 2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000002 [ 2.613080] Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 56 44 8d 14 09 41 55 41 54 55 53 44 89 d3 09 cb 48 83 ec 38 48 8b 05 c5 03 29 01 <4c> 8b 20 4c 39 e0 0f 84 d7 01 00 00 4c 89 44 24 08 89 54 24 20 [ 2.613080] RIP: ima_match_policy+0x23/0x390 RSP: ffffc90000193e88 [ 2.613080] CR2: 0000000000000000 [ 2.613080] ---[ end trace 9a9f0a8a73079f6a ]--- [ 2.673052] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 2.673052] [ 2.675337] Kernel Offset: disabled [ 2.676405] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 Signed-off-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit f002612 ] This happens when BMC doesn't return any data and the code is trying to print the value of data[2]. Getting following crash: [ 484.728410] Unable to handle kernel NULL pointer dereference at virtual address 00000002 [ 484.736496] pgd = ffff0000094a2000 [ 484.739885] [00000002] *pgd=00000047fcffe003, *pud=00000047fcffd003, *pmd=0000000000000000 [ 484.748158] Internal error: Oops: 96000005 [#1] SMP [...] [ 485.101451] Call trace: [...] [ 485.188473] [<ffff000000a46e68>] msg_done_handler+0x668/0x700 [ipmi_ssif] [ 485.195249] [<ffff000000a456b8>] ipmi_ssif_thread+0x110/0x128 [ipmi_ssif] [ 485.202038] [<ffff0000080f1430>] kthread+0x108/0x138 [ 485.206994] [<ffff0000080838e0>] ret_from_fork+0x10/0x30 [ 485.212294] Code: aa1903e1 aa1803e0 b900227f 95fef6a5 (39400aa3) Adding a check to validate the data len before printing data[2] to fix this issue. Signed-off-by: Kamlakant Patel <kamlakant.patel@cavium.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit 4058ebf ] When using a AIO read() operation on the function FS gadget driver a URB is submitted asynchronously and on URB completion the received data is copied to the userspace buffer associated with the read operation. This is done from a kernel worker thread invoking copy_to_user() (through copy_to_iter()). And while the user space process memory is made available to the kernel thread using use_mm(), some architecture require in addition to this that the operation runs with USER_DS set. Otherwise the userspace memory access will fail. For example on ARM64 with Privileged Access Never (PAN) and User Access Override (UAO) enabled the following crash occurs. Internal error: Accessing user space memory with fs=KERNEL_DS: 9600004f [#1] SMP Modules linked in: CPU: 2 PID: 1636 Comm: kworker/2:1 Not tainted 4.9.0-04081-g8ab2dfb-dirty #487 Hardware name: ZynqMP ZCU102 Rev1.0 (DT) Workqueue: events ffs_user_copy_worker task: ffffffc87afc8080 task.stack: ffffffc87a00c000 PC is at __arch_copy_to_user+0x190/0x220 LR is at copy_to_iter+0x78/0x3c8 [...] [<ffffff800847b790>] __arch_copy_to_user+0x190/0x220 [<ffffff80086f25d8>] ffs_user_copy_worker+0x70/0x130 [<ffffff80080b8c64>] process_one_work+0x1dc/0x460 [<ffffff80080b8f38>] worker_thread+0x50/0x4b0 [<ffffff80080bf5a0>] kthread+0xd8/0xf0 [<ffffff8008083680>] ret_from_fork+0x10/0x50 Address this by placing a set_fs(USER_DS) before of the copy operation and revert it again once the copy operation has finished. This patch is analogous to commit d7ffde3 ("vhost: use USER_DS in vhost_worker thread") which addresses the same underlying issue. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit 2bbea6e ] when mounting an ISO filesystem sometimes (very rarely) the system hangs because of a race condition between two tasks. PID: 6766 TASK: ffff88007b2a6dd0 CPU: 0 COMMAND: "mount" #0 [ffff880078447ae0] __schedule at ffffffff8168d605 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod] #5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50 #6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3 #7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs] #8 [ffff880078447da8] mount_bdev at ffffffff81202570 #9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs] #10 [ffff880078447e28] mount_fs at ffffffff81202d09 #11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f #12 [ffff880078447ea8] do_mount at ffffffff81220fee #13 [ffff880078447f28] sys_mount at ffffffff812218d6 rockchip-linux#14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49 RIP: 00007fd9ea914e9a RSP: 00007ffd5d9bf648 RFLAGS: 00010246 RAX: 00000000000000a5 RBX: ffffffff81698c49 RCX: 0000000000000010 RDX: 00007fd9ec2bc210 RSI: 00007fd9ec2bc290 RDI: 00007fd9ec2bcf30 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000010 R10: 00000000c0ed0001 R11: 0000000000000206 R12: 00007fd9ec2bc040 R13: 00007fd9eb6b2380 R14: 00007fd9ec2bc210 R15: 00007fd9ec2bcf30 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b This task was trying to mount the cdrom. It allocated and configured a super_block struct and owned the write-lock for the super_block->s_umount rwsem. While exclusively owning the s_umount lock, it called sr_block_ioctl and waited to acquire the global sr_mutex lock. PID: 6785 TASK: ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd" #0 [ffff880078417898] __schedule at ffffffff8168d605 #1 [ffff880078417900] schedule at ffffffff8168dc59 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838 #4 [ffff8800784179d0] down_read at ffffffff8168cde0 #5 [ffff8800784179e8] get_super at ffffffff81201cc7 #6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de #7 [ffff880078417a40] flush_disk at ffffffff8123a94b #8 [ffff880078417a88] check_disk_change at ffffffff8123ab50 #9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom] #10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod] #11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86 #12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65 #13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b rockchip-linux#14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7 rockchip-linux#15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf rockchip-linux#16 [ffff880078417d00] do_last at ffffffff8120d53d rockchip-linux#17 [ffff880078417db0] path_openat at ffffffff8120e6b2 rockchip-linux#18 [ffff880078417e48] do_filp_open at ffffffff8121082b rockchip-linux#19 [ffff880078417f18] do_sys_open at ffffffff811fdd33 rockchip-linux#20 [ffff880078417f70] sys_open at ffffffff811fde4e rockchip-linux#21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49 RIP: 00007f29438b0c20 RSP: 00007ffc76624b78 RFLAGS: 00010246 RAX: 0000000000000002 RBX: ffffffff81698c49 RCX: 0000000000000000 RDX: 00007f2944a5fa70 RSI: 00000000000a0800 RDI: 00007f2944a5fa70 RBP: 00007f2944a5f540 R8: 0000000000000000 R9: 0000000000000020 R10: 00007f2943614c40 R11: 0000000000000246 R12: ffffffff811fde4e R13: ffff880078417f78 R14: 000000000000000c R15: 00007f2944a4b010 ORIG_RAX: 0000000000000002 CS: 0033 SS: 002b This task tried to open the cdrom device, the sr_block_open function acquired the global sr_mutex lock. The call to check_disk_change() then saw an event flag indicating a possible media change and tried to flush any cached data for the device. As part of the flush, it tried to acquire the super_block->s_umount lock associated with the cdrom device. This was the same super_block as created and locked by the previous task. The first task acquires the s_umount lock and then the sr_mutex_lock; the second task acquires the sr_mutex_lock and then the s_umount lock. This patch fixes the issue by moving check_disk_change() out of cdrom_open() and let the caller take care of it. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit a3ca831 ] When booting up with "threadirqs" in command line, all irq handlers of the DMA controller pl330 will be threaded forcedly. These threads will race for the same list, pl330->req_done. Before the callback, the spinlock was released. And after it, the spinlock was taken. This opened an race window where another threaded irq handler could steal the spinlock and be permitted to delete entries of the list, pl330->req_done. If the later deleted an entry that was still referred to by the former, there would be a kernel panic when the former was scheduled and tried to get the next sibling of the deleted entry. The scenario could be depicted as below: Thread: T1 pl330->req_done Thread: T2 | | | | -A-B-C-D- | Locked | | | | Waiting Del A | | | -B-C-D- | Unlocked | | | | Locked Waiting | | | | Del B | | | | -C-D- Unlocked Waiting | | | Locked | get C via B \ - Kernel panic The kernel panic looked like as below: Unable to handle kernel paging request at virtual address dead000000000108 pgd = ffffff8008c9e000 [dead000000000108] *pgd=000000027fffe003, *pud=000000027fffe003, *pmd=0000000000000000 Internal error: Oops: 96000044 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 85 Comm: irq/59-66330000 Not tainted 4.8.24-WR9.0.0.12_standard #2 Hardware name: Broadcom NS2 SVK (DT) task: ffffffc1f5cc3c00 task.stack: ffffffc1f5ce0000 PC is at pl330_irq_handler+0x27c/0x390 LR is at pl330_irq_handler+0x2a8/0x390 pc : [<ffffff80084cb694>] lr : [<ffffff80084cb6c0>] pstate: 800001c5 sp : ffffffc1f5ce3d00 x29: ffffffc1f5ce3d00 x28: 0000000000000140 x27: ffffffc1f5c530b0 x26: dead000000000100 x25: dead000000000200 x24: 0000000000418958 x23: 0000000000000001 x22: ffffffc1f5ccd668 x21: ffffffc1f5ccd590 x20: ffffffc1f5ccd418 x19: dead000000000060 x18: 0000000000000001 x17: 0000000000000007 x16: 0000000000000001 x15: ffffffffffffffff x14: ffffffffffffffff x13: ffffffffffffffff x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000840 x9 : ffffffc1f5ce0000 x8 : ffffffc1f5cc3338 x7 : ffffff8008ce2020 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : dead000000000200 x2 : dead000000000100 x1 : 0000000000000140 x0 : ffffffc1f5ccd590 Process irq/59-66330000 (pid: 85, stack limit = 0xffffffc1f5ce0020) Stack: (0xffffffc1f5ce3d00 to 0xffffffc1f5ce4000) 3d00: ffffffc1f5ce3d80 ffffff80080f09d0 ffffffc1f5ca0c00 ffffffc1f6f7c600 3d20: ffffffc1f5ce0000 ffffffc1f6f7c600 ffffffc1f5ca0c00 ffffff80080f0998 3d40: ffffffc1f5ce0000 ffffff80080f0000 0000000000000000 0000000000000000 3d60: ffffff8008ce202c ffffff8008ce2020 ffffffc1f5ccd668 ffffffc1f5c530b0 3d80: ffffffc1f5ce3db0 ffffff80080f0d70 ffffffc1f5ca0c40 0000000000000001 3da0: ffffffc1f5ce0000 ffffff80080f0cfc ffffffc1f5ce3e20 ffffff80080bf4f8 3dc0: ffffffc1f5ca0c80 ffffff8008bf3798 ffffff8008955528 ffffffc1f5ca0c00 3de0: ffffff80080f0c30 0000000000000000 0000000000000000 0000000000000000 3e00: 0000000000000000 0000000000000000 0000000000000000 ffffff80080f0b68 3e20: 0000000000000000 ffffff8008083690 ffffff80080bf420 ffffffc1f5ca0c80 3e40: 0000000000000000 0000000000000000 0000000000000000 ffffff80080cb648 3e60: ffffff8008b1c780 0000000000000000 0000000000000000 ffffffc1f5ca0c00 3e80: ffffffc100000000 ffffff8000000000 ffffffc1f5ce3e90 ffffffc1f5ce3e90 3ea0: 0000000000000000 ffffff8000000000 ffffffc1f5ce3eb0 ffffffc1f5ce3eb0 3ec0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3ee0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f40: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fa0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fc0: 0000000000000000 0000000000000005 0000000000000000 0000000000000000 3fe0: 0000000000000000 0000000000000000 0000000275ce3ff0 0000000275ce3ff8 Call trace: Exception stack(0xffffffc1f5ce3b30 to 0xffffffc1f5ce3c60) 3b20: dead000000000060 0000008000000000 3b40: ffffffc1f5ce3d00 ffffff80084cb694 0000000000000008 0000000000000e88 3b60: ffffffc1f5ce3bb0 ffffff80080dac68 ffffffc1f5ce3b90 ffffff8008826fe4 3b80: 00000000000001c0 00000000000001c0 ffffffc1f5ce3bb0 ffffff800848dfcc 3ba0: 0000000000020000 ffffff8008b15ae4 ffffffc1f5ce3c00 ffffff800808f000 3bc0: 0000000000000010 ffffff80088377f0 ffffffc1f5ccd590 0000000000000140 3be0: dead000000000100 dead000000000200 0000000000000001 0000000000000000 3c00: 0000000000000000 ffffff8008ce2020 ffffffc1f5cc3338 ffffffc1f5ce0000 3c20: 0000000000000840 0000000000000001 0000000000000000 ffffffffffffffff 3c40: ffffffffffffffff ffffffffffffffff 0000000000000001 0000000000000007 [<ffffff80084cb694>] pl330_irq_handler+0x27c/0x390 [<ffffff80080f09d0>] irq_forced_thread_fn+0x38/0x88 [<ffffff80080f0d70>] irq_thread+0x140/0x200 [<ffffff80080bf4f8>] kthread+0xd8/0xf0 [<ffffff8008083690>] ret_from_fork+0x10/0x40 Code: f2a00838 f9405763 aa1c03e1 aa1503e0 (f9000443) ---[ end trace f50005726d31199c ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 0-1 Kernel Offset: disabled Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt To fix this, re-start with the list-head after dropping the lock then re-takeing it. Reviewed-by: Frank Mori Hess <fmh6jj@gmail.com> Tested-by: Frank Mori Hess <fmh6jj@gmail.com> Signed-off-by: Qi Hou <qi.hou@windriver.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
Because some mmc execute tuning should take more time, so if dm target device is not probe completely before dm verity, will trigger: [ 0.834803] device-mapper: init: attempting early device configuration. [ 0.836226] device-mapper: init: adding target '0 1031864 verity 1 PARTUUID=cfc90ed7-b23f-459b-896f-8135b56567a1 PARTUUID=cfc90ed7-b23f-459b-896f-8135b56567a1 4096 4096 128983 128983 sha1 d0f6e81bf584217e524e88b023d0c70422fb2f19 e939f8142d39394fb14f0df917de9346cb045b78 10 restart_on_corruption ignore_zero_blocks use_fec_from_device PARTUUID=cfc90ed7-b23f-459b-896f-8135b56567a1 fec_roots 2 fec_blocks 130000 fec_start 130000' [ 0.836341] device-mapper: table: 253:0: verity: Data device lookup failed [ 0.836355] device-mapper: init: starting dm-0 (vroot) failed [ 0.836916] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 0.843161] pgd = c0004000 [ 0.843415] [00000000] *pgd=00000000 [ 0.843810] Internal error: Oops: 80000005 [#1] PREEMPT SMP ARM [ 0.844345] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.4.77 #1 [ 0.844870] Hardware name: Generic DT based system [ 0.845299] task: de4b0000 ti: de4b8000 task.ti: de4b8000 [ 0.845782] PC is at 0x0 [ 0.846018] LR is at generic_make_request+0xc8/0x220 [ 0.846458] pc : [<00000000>] lr : [<c03aae2c>] psr: 60000013 [ 0.846458] sp : de4b9b58 ip : 00000004 fp : de4b9d9c [ 0.847466] r10: 00000000 r9 : de7fb020 r8 : c100390c [ 0.847927] r7 : ffffffff r6 : de4b9b5c r5 : 00000000 r4 : dde71540 [ 0.848508] r3 : 00000000 r2 : dc8ba64d r1 : dde71540 r0 : de7fb020 [ 0.849080] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 0.849714] Control: 10c5387d Table: 6000406a DAC: 00000051 Change-Id: Idf9a33fd15adab8aa5e13f74c92b3270c9877035 Signed-off-by: Weiwen Chen <cww@rock-chips.com>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
commit 1863c38 upstream. Running the following: # cd /sys/kernel/debug/tracing # echo 500000 > buffer_size_kb [ Or some other number that takes up most of memory ] # echo snapshot > events/sched/sched_switch/trigger Triggers the following bug: ------------[ cut here ]------------ kernel BUG at mm/slub.c:296! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI CPU: 6 PID: 6878 Comm: bash Not tainted 4.18.0-rc6-test+ #1066 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:kfree+0x16c/0x180 Code: 05 41 0f b6 72 51 5b 5d 41 5c 4c 89 d7 e9 ac b3 f8 ff 48 89 d9 48 89 da 41 b8 01 00 00 00 5b 5d 41 5c 4c 89 d6 e9 f4 f3 ff ff <0f> 0b 0f 0b 48 8b 3d d9 d8 f9 00 e9 c1 fe ff ff 0f 1f 40 00 0f 1f RSP: 0018:ffffb654436d3d88 EFLAGS: 00010246 RAX: ffff91a9d50f3d80 RBX: ffff91a9d50f3d80 RCX: ffff91a9d50f3d80 RDX: 00000000000006a4 RSI: ffff91a9de5a60e0 RDI: ffff91a9d9803500 RBP: ffffffff8d267c80 R08: 00000000000260e0 R09: ffffffff8c1a56be R10: fffff0d404543cc0 R11: 0000000000000389 R12: ffffffff8c1a56be R13: ffff91a9d9930e18 R14: ffff91a98c0c2890 R15: ffffffff8d267d00 FS: 00007f363ea64700(0000) GS:ffff91a9de580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055c1cacc8e10 CR3: 00000000d9b46003 CR4: 00000000001606e0 Call Trace: event_trigger_callback+0xee/0x1d0 event_trigger_write+0xfc/0x1a0 __vfs_write+0x33/0x190 ? handle_mm_fault+0x115/0x230 ? _cond_resched+0x16/0x40 vfs_write+0xb0/0x190 ksys_write+0x52/0xc0 do_syscall_64+0x5a/0x160 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f363e16ab50 Code: 73 01 c3 48 8b 0d 38 83 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 79 db 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 1e e3 01 00 48 89 04 24 RSP: 002b:00007fff9a4c6378 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f363e16ab50 RDX: 0000000000000009 RSI: 000055c1cacc8e10 RDI: 0000000000000001 RBP: 000055c1cacc8e10 R08: 00007f363e435740 R09: 00007f363ea64700 R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000009 R13: 0000000000000001 R14: 00007f363e4345e0 R15: 00007f363e4303c0 Modules linked in: ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device i915 snd_pcm snd_timer i2c_i801 snd soundcore i2c_algo_bit drm_kms_helper 86_pkg_temp_thermal video kvm_intel kvm irqbypass wmi e1000e ---[ end trace d301afa879ddfa25 ]--- The cause is because the register_snapshot_trigger() call failed to allocate the snapshot buffer, and then called unregister_trigger() which freed the data that was passed to it. Then on return to the function that called register_snapshot_trigger(), as it sees it failed to register, it frees the trigger_data again and causes a double free. By calling event_trigger_init() on the trigger_data (which only ups the reference counter for it), and then event_trigger_free() afterward, the trigger_data would not get freed by the registering trigger function as it would only up and lower the ref count for it. If the register trigger function fails, then the event_trigger_free() called after it will free the trigger data normally. Link: http://lkml.kernel.org/r/20180724191331.738eb819@gandalf.local.home Cc: stable@vger.kerne.org Fixes: 93e31ff ("tracing: Add 'snapshot' event trigger command") Reported-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit 3171822 ] When running a fuzz tester against a KASAN-enabled kernel, the following splat periodically occurs. The problem occurs when the test sends a GETDEVICEINFO request with a malformed xdr array (size but no data) for gdia_notify_types and the array size is > 0x3fffffff, which results in an overflow in the value of nbytes which is passed to read_buf(). If the array size is 0x40000000, 0x80000000, or 0xc0000000, then after the overflow occurs, the value of nbytes 0, and when that happens the pointer returned by read_buf() points to the end of the xdr data (i.e. argp->end) when really it should be returning NULL. Fix this by returning NFS4ERR_BAD_XDR if the array size is > 1000 (this value is arbitrary, but it's the same threshold used by nfsd4_decode_bitmap()... in could really be any value >= 1 since it's expected to get at most a single bitmap in gdia_notify_types). [ 119.256854] ================================================================== [ 119.257611] BUG: KASAN: use-after-free in nfsd4_decode_getdeviceinfo+0x5a4/0x5b0 [nfsd] [ 119.258422] Read of size 4 at addr ffff880113ada000 by task nfsd/538 [ 119.259146] CPU: 0 PID: 538 Comm: nfsd Not tainted 4.17.0+ #1 [ 119.259662] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.fc25 04/01/2014 [ 119.261202] Call Trace: [ 119.262265] dump_stack+0x71/0xab [ 119.263371] print_address_description+0x6a/0x270 [ 119.264609] kasan_report+0x258/0x380 [ 119.265854] ? nfsd4_decode_getdeviceinfo+0x5a4/0x5b0 [nfsd] [ 119.267291] nfsd4_decode_getdeviceinfo+0x5a4/0x5b0 [nfsd] [ 119.268549] ? nfs4svc_decode_compoundargs+0xa5b/0x13c0 [nfsd] [ 119.269873] ? nfsd4_decode_sequence+0x490/0x490 [nfsd] [ 119.271095] nfs4svc_decode_compoundargs+0xa5b/0x13c0 [nfsd] [ 119.272393] ? nfsd4_release_compoundargs+0x1b0/0x1b0 [nfsd] [ 119.273658] nfsd_dispatch+0x183/0x850 [nfsd] [ 119.274918] svc_process+0x161c/0x31a0 [sunrpc] [ 119.276172] ? svc_printk+0x190/0x190 [sunrpc] [ 119.277386] ? svc_xprt_release+0x451/0x680 [sunrpc] [ 119.278622] nfsd+0x2b9/0x430 [nfsd] [ 119.279771] ? nfsd_destroy+0x1c0/0x1c0 [nfsd] [ 119.281157] kthread+0x2db/0x390 [ 119.282347] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 119.283756] ret_from_fork+0x35/0x40 [ 119.286041] Allocated by task 436: [ 119.287525] kasan_kmalloc+0xa0/0xd0 [ 119.288685] kmem_cache_alloc+0xe9/0x1f0 [ 119.289900] get_empty_filp+0x7b/0x410 [ 119.291037] path_openat+0xca/0x4220 [ 119.292242] do_filp_open+0x182/0x280 [ 119.293411] do_sys_open+0x216/0x360 [ 119.294555] do_syscall_64+0xa0/0x2f0 [ 119.295721] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 119.298068] Freed by task 436: [ 119.299271] __kasan_slab_free+0x130/0x180 [ 119.300557] kmem_cache_free+0x78/0x210 [ 119.301823] rcu_process_callbacks+0x35b/0xbd0 [ 119.303162] __do_softirq+0x192/0x5ea [ 119.305443] The buggy address belongs to the object at ffff880113ada000 which belongs to the cache filp of size 256 [ 119.308556] The buggy address is located 0 bytes inside of 256-byte region [ffff880113ada000, ffff880113ada100) [ 119.311376] The buggy address belongs to the page: [ 119.312728] page:ffffea00044eb680 count:1 mapcount:0 mapping:0000000000000000 index:0xffff880113ada780 [ 119.314428] flags: 0x17ffe000000100(slab) [ 119.315740] raw: 0017ffe000000100 0000000000000000 ffff880113ada780 00000001000c0001 [ 119.317379] raw: ffffea0004553c60 ffffea00045c11e0 ffff88011b167e00 0000000000000000 [ 119.319050] page dumped because: kasan: bad access detected [ 119.321652] Memory state around the buggy address: [ 119.322993] ffff880113ad9f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 119.324515] ffff880113ad9f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 119.326087] >ffff880113ada000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 119.327547] ^ [ 119.328730] ffff880113ada080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 119.330218] ffff880113ada100: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 119.331740] ================================================================== Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit c42a0e2 ] We met NULL pointer BUG as follow: [ 151.760358] BUG: unable to handle kernel NULL pointer dereference at 0000000000000060 [ 151.761340] PGD 80000001011eb067 P4D 80000001011eb067 PUD 1011ea067 PMD 0 [ 151.762039] Oops: 0000 [#1] SMP PTI [ 151.762406] Modules linked in: [ 151.762723] CPU: 2 PID: 3561 Comm: mdadm-test Kdump: loaded Not tainted 4.17.0-rc1+ rockchip-linux#238 [ 151.763542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014 [ 151.764432] RIP: 0010:remove_and_add_spares.part.56+0x13c/0x3a0 [ 151.765061] RSP: 0018:ffffc90001d7fcd8 EFLAGS: 00010246 [ 151.765590] RAX: 0000000000000000 RBX: ffff88013601d600 RCX: 0000000000000000 [ 151.766306] RDX: 0000000000000000 RSI: ffff88013601d600 RDI: ffff880136187000 [ 151.767014] RBP: ffff880136187018 R08: 0000000000000003 R09: 0000000000000051 [ 151.767728] R10: ffffc90001d7fed8 R11: 0000000000000000 R12: ffff88013601d600 [ 151.768447] R13: ffff8801298b1300 R14: ffff880136187000 R15: 0000000000000000 [ 151.769160] FS: 00007f2624276700(0000) GS:ffff88013ae80000(0000) knlGS:0000000000000000 [ 151.769971] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 151.770554] CR2: 0000000000000060 CR3: 0000000111aac000 CR4: 00000000000006e0 [ 151.771272] Call Trace: [ 151.771542] md_ioctl+0x1df2/0x1e10 [ 151.771906] ? __switch_to+0x129/0x440 [ 151.772295] ? __schedule+0x244/0x850 [ 151.772672] blkdev_ioctl+0x4bd/0x970 [ 151.773048] block_ioctl+0x39/0x40 [ 151.773402] do_vfs_ioctl+0xa4/0x610 [ 151.773770] ? dput.part.23+0x87/0x100 [ 151.774151] ksys_ioctl+0x70/0x80 [ 151.774493] __x64_sys_ioctl+0x16/0x20 [ 151.774877] do_syscall_64+0x5b/0x180 [ 151.775258] entry_SYSCALL_64_after_hwframe+0x44/0xa9 For raid6, when two disk of the array are offline, two spare disks can be added into the array. Before spare disks recovery completing, system reboot and mdadm thinks it is ok to restart the degraded array by md_ioctl(). Since disks in raid6 is not only_parity(), raid5_run() will abort, when there is no PPL feature or not setting 'start_dirty_degraded' parameter. Therefore, mddev->pers is NULL. But, mddev->raid_disks has been set and it will not be cleared when raid5_run abort. md_ioctl() can execute cmd 'HOT_REMOVE_DISK' to remove a disk by mdadm, which will cause NULL pointer dereference in remove_and_add_spares() finally. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit b6da31b ] Unlike normal serials, in pty layer, there is no guarantee that multiple threads don't insert input characters at the same time. If it is happened, tty_insert_flip_string_fixed_flag can be executed concurrently. This can lead slab out-of-bounds write in tty_insert_flip_string_fixed_flag. Call sequences are as follows. CPU0 CPU1 n_tty_ioctl_helper n_tty_ioctl_helper __start_tty tty_send_xchar tty_wakeup pty_write n_hdlc_tty_wakeup tty_insert_flip_string n_hdlc_send_frames tty_insert_flip_string_fixed_flag pty_write tty_insert_flip_string tty_insert_flip_string_fixed_flag To fix the race, acquire port->lock in pty_write() before it inserts input characters to tty buffer. It prevents multiple threads from inserting input characters concurrently. The crash log is as follows: BUG: KASAN: slab-out-of-bounds in tty_insert_flip_string_fixed_flag+0xb5/ 0x130 drivers/tty/tty_buffer.c:316 at addr ffff880114fcc121 Write of size 1792 by task syz-executor0/30017 CPU: 1 PID: 30017 Comm: syz-executor0 Not tainted 4.8.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 0000000000000000 ffff88011638f888 ffffffff81694cc3 ffff88007d802140 ffff880114fcb300 ffff880114fcc300 ffff880114fcb300 ffff88011638f8b0 ffffffff8130075c ffff88011638f940 ffff88007d802140 ffff880194fcc121 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0xb3/0x110 lib/dump_stack.c:51 kasan_object_err+0x1c/0x70 mm/kasan/report.c:156 print_address_description mm/kasan/report.c:194 [inline] kasan_report_error+0x1f7/0x4e0 mm/kasan/report.c:283 kasan_report+0x36/0x40 mm/kasan/report.c:303 check_memory_region_inline mm/kasan/kasan.c:292 [inline] check_memory_region+0x13e/0x1a0 mm/kasan/kasan.c:299 memcpy+0x37/0x50 mm/kasan/kasan.c:335 tty_insert_flip_string_fixed_flag+0xb5/0x130 drivers/tty/tty_buffer.c:316 tty_insert_flip_string include/linux/tty_flip.h:35 [inline] pty_write+0x7f/0xc0 drivers/tty/pty.c:115 n_hdlc_send_frames+0x1d4/0x3b0 drivers/tty/n_hdlc.c:419 n_hdlc_tty_wakeup+0x73/0xa0 drivers/tty/n_hdlc.c:496 tty_wakeup+0x92/0xb0 drivers/tty/tty_io.c:601 __start_tty.part.26+0x66/0x70 drivers/tty/tty_io.c:1018 __start_tty+0x34/0x40 drivers/tty/tty_io.c:1013 n_tty_ioctl_helper+0x146/0x1e0 drivers/tty/tty_ioctl.c:1138 n_hdlc_tty_ioctl+0xb3/0x2b0 drivers/tty/n_hdlc.c:794 tty_ioctl+0xa85/0x16d0 drivers/tty/tty_io.c:2992 vfs_ioctl fs/ioctl.c:43 [inline] do_vfs_ioctl+0x13e/0xba0 fs/ioctl.c:679 SYSC_ioctl fs/ioctl.c:694 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685 entry_SYSCALL_64_fastpath+0x1f/0xbd Signed-off-by: DaeRyong Jeong <threeearcat@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit 78e4507 ] While performing cleanup, driver is messing with card->ocr value by not masking rocr against ocr_avail. Below panic is observed with some of the SDIO host controllers due to this. Issue is resolved by reverting incorrect modifications to vdd. [ 927.423821] mmc1: Invalid vdd 0x1f [ 927.423925] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic [ 927.424073] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000-caracalla #1 [ 927.424075] Hardware name: Dell Inc. Edge Gateway 3003/ , BIOS 01.00.06 01/22/2018 [ 927.424082] RIP: 0010:sdhci_set_power_noreg+0xdd/0x190[sdhci] [ 927.424085] RSP: 0018:ffffac3fc064b930 EFLAGS: 00010282 [ 927.424107] Call Trace: [ 927.424118] sdhci_set_power+0x5a/0x60 [sdhci] [ 927.424125] sdhci_set_ios+0x360/0x3b0 [sdhci] [ 927.424133] mmc_set_initial_state+0x92/0x120 [ 927.424137] mmc_power_up.part.34+0x33/0x1d0 [ 927.424141] mmc_power_up+0x17/0x20 [ 927.424147] mmc_sdio_runtime_resume+0x2d/0x50 [ 927.424151] mmc_runtime_resume+0x17/0x20 [ 927.424156] __rpm_callback+0xc4/0x200 [ 927.424161] ? idr_alloc_cyclic+0x57/0xd0 [ 927.424165] ? mmc_runtime_suspend+0x20/0x20 [ 927.424169] rpm_callback+0x24/0x80 [ 927.424172] ? mmc_runtime_suspend+0x20/0x20 [ 927.424176] rpm_resume+0x4b3/0x6c0 [ 927.424181] __pm_runtime_resume+0x4e/0x80 [ 927.424188] driver_probe_device+0x41/0x490 [ 927.424192] __driver_attach+0xdf/0xf0 [ 927.424196] ? driver_probe_device+0x490/0x490 [ 927.424201] bus_for_each_dev+0x6c/0xc0 [ 927.424205] driver_attach+0x1e/0x20 [ 927.424209] bus_add_driver+0x1f4/0x270 [ 927.424217] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.424221] driver_register+0x60/0xe0 [ 927.424227] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.424231] sdio_register_driver+0x20/0x30 [ 927.424237] rsi_module_init+0x16/0x40 [rsi_sdio] Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
commit 89da619 upstream. Kernel panic when with high memory pressure, calltrace looks like, PID: 21439 TASK: ffff881be3afedd0 CPU: 16 COMMAND: "java" #0 [ffff881ec7ed7630] machine_kexec at ffffffff81059beb #1 [ffff881ec7ed7690] __crash_kexec at ffffffff81105942 #2 [ffff881ec7ed7760] crash_kexec at ffffffff81105a30 #3 [ffff881ec7ed7778] oops_end at ffffffff816902c8 #4 [ffff881ec7ed77a0] no_context at ffffffff8167ff46 #5 [ffff881ec7ed77f0] __bad_area_nosemaphore at ffffffff8167ffdc #6 [ffff881ec7ed7838] __node_set at ffffffff81680300 #7 [ffff881ec7ed7860] __do_page_fault at ffffffff8169320f #8 [ffff881ec7ed78c0] do_page_fault at ffffffff816932b5 #9 [ffff881ec7ed78f0] page_fault at ffffffff8168f4c8 [exception RIP: _raw_spin_lock_irqsave+47] RIP: ffffffff8168edef RSP: ffff881ec7ed79a8 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffffea0019740d00 RCX: ffff881ec7ed7fd8 RDX: 0000000000020000 RSI: 0000000000000016 RDI: 0000000000000008 RBP: ffff881ec7ed79a8 R8: 0000000000000246 R9: 000000000001a098 R10: ffff88107ffda000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000008 R14: ffff881ec7ed7a80 R15: ffff881be3afedd0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 It happens in the pagefault and results in double pagefault during compacting pages when memory allocation fails. Analysed the vmcore, the page leads to second pagefault is corrupted with _mapcount=-256, but private=0. It's caused by the race between migration and ballooning, and lock missing in virtballoon_migratepage() of virtio_balloon driver. This patch fix the bug. Fixes: e225042 ("virtio_balloon: introduce migration primitives to balloon pages") Cc: stable@vger.kernel.org Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: Huang Chong <huang.chong@zte.com.cn> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
…ment enabled commit 1214fd7 upstream. Surround scsi_execute() calls with scsi_autopm_get_device() and scsi_autopm_put_device(). Note: removing sr_mutex protection from the scsi_cd_get() and scsi_cd_put() calls is safe because the purpose of sr_mutex is to serialize cdrom_*() calls. This patch avoids that complaints similar to the following appear in the kernel log if runtime power management is enabled: INFO: task systemd-udevd:650 blocked for more than 120 seconds. Not tainted 4.18.0-rc7-dbg+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. systemd-udevd D28176 650 513 0x00000104 Call Trace: __schedule+0x444/0xfe0 schedule+0x4e/0xe0 schedule_preempt_disabled+0x18/0x30 __mutex_lock+0x41c/0xc70 mutex_lock_nested+0x1b/0x20 __blkdev_get+0x106/0x970 blkdev_get+0x22c/0x5a0 blkdev_open+0xe9/0x100 do_dentry_open.isra.19+0x33e/0x570 vfs_open+0x7c/0xd0 path_openat+0x6e3/0x1120 do_filp_open+0x11c/0x1c0 do_sys_open+0x208/0x2d0 __x64_sys_openat+0x59/0x70 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Maurizio Lombardi <mlombard@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: <stable@vger.kernel.org> Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit 61ef4b0 ] The shift of 'cwnd' with '(now - hc->tx_lsndtime) / hc->tx_rto' value can lead to undefined behavior [1]. In order to fix this use a gradual shift of the window with a 'while' loop, similar to what tcp_cwnd_restart() is doing. When comparing delta and RTO there is a minor difference between TCP and DCCP, the last one also invokes dccp_cwnd_restart() and reduces 'cwnd' if delta equals RTO. That case is preserved in this change. [1]: [40850.963623] UBSAN: Undefined behaviour in net/dccp/ccids/ccid2.c:237:7 [40851.043858] shift exponent 67 is too large for 32-bit type 'unsigned int' [40851.127163] CPU: 3 PID: 15940 Comm: netstress Tainted: G W E 4.18.0-rc7.x86_64 #1 ... [40851.377176] Call Trace: [40851.408503] dump_stack+0xf1/0x17b [40851.451331] ? show_regs_print_info+0x5/0x5 [40851.503555] ubsan_epilogue+0x9/0x7c [40851.548363] __ubsan_handle_shift_out_of_bounds+0x25b/0x2b4 [40851.617109] ? __ubsan_handle_load_invalid_value+0x18f/0x18f [40851.686796] ? xfrm4_output_finish+0x80/0x80 [40851.739827] ? lock_downgrade+0x6d0/0x6d0 [40851.789744] ? xfrm4_prepare_output+0x160/0x160 [40851.845912] ? ip_queue_xmit+0x810/0x1db0 [40851.895845] ? ccid2_hc_tx_packet_sent+0xd36/0x10a0 [dccp] [40851.963530] ccid2_hc_tx_packet_sent+0xd36/0x10a0 [dccp] [40852.029063] dccp_xmit_packet+0x1d3/0x720 [dccp] [40852.086254] dccp_write_xmit+0x116/0x1d0 [dccp] [40852.142412] dccp_sendmsg+0x428/0xb20 [dccp] [40852.195454] ? inet_dccp_listen+0x200/0x200 [dccp] [40852.254833] ? sched_clock+0x5/0x10 [40852.298508] ? sched_clock+0x5/0x10 [40852.342194] ? inet_create+0xdf0/0xdf0 [40852.388988] sock_sendmsg+0xd9/0x160 ... Fixes: 113ced1 ("dccp ccid-2: Perform congestion-window validation") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit 2df8bee ] Li Shuang reported the following crash: [ 71.267724] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 [ 71.276456] PGD 800000085d9bd067 P4D 800000085d9bd067 PUD 859a0b067 PMD 0 [ 71.284127] Oops: 0000 [#1] SMP PTI [ 71.288015] CPU: 12 PID: 2386 Comm: tc Not tainted 4.18.0-rc8.latest+ rockchip-linux#131 [ 71.295686] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.1.5 04/11/2016 [ 71.304037] RIP: 0010:tcindex_delete+0x72/0x280 [cls_tcindex] [ 71.310446] Code: 00 31 f6 48 87 75 20 48 85 f6 74 11 48 8b 47 18 48 8b 40 08 48 8b 40 50 e8 fb a6 f8 fc 48 85 db 0f 84 dc 00 00 00 48 8b 73 18 <8b> 56 04 48 8d 7e 04 85 d2 0f 84 7b 01 00 [ 71.331517] RSP: 0018:ffffb45207b3f898 EFLAGS: 00010282 [ 71.337345] RAX: ffff8ad3d72d6360 RBX: ffff8acc84393680 RCX: 000000000000002e [ 71.345306] RDX: ffff8ad3d72c8570 RSI: 0000000000000000 RDI: ffff8ad847a45800 [ 71.353277] RBP: ffff8acc84393688 R08: ffff8ad3d72c8400 R09: 0000000000000000 [ 71.361238] R10: ffff8ad3de786e00 R11: 0000000000000000 R12: ffffb45207b3f8c7 [ 71.369199] R13: ffff8ad3d93bd2a0 R14: 000000000000002e R15: ffff8ad3d72c9600 [ 71.377161] FS: 00007f9d3ec3e740(0000) GS:ffff8ad3df980000(0000) knlGS:0000000000000000 [ 71.386188] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 71.392597] CR2: 0000000000000004 CR3: 0000000852f06003 CR4: 00000000001606e0 [ 71.400558] Call Trace: [ 71.403299] tcindex_destroy_element+0x25/0x40 [cls_tcindex] [ 71.409611] tcindex_walk+0xbb/0x110 [cls_tcindex] [ 71.414953] tcindex_destroy+0x44/0x90 [cls_tcindex] [ 71.420492] ? tcindex_delete+0x280/0x280 [cls_tcindex] [ 71.426323] tcf_proto_destroy+0x16/0x40 [ 71.430696] tcf_chain_flush+0x51/0x70 [ 71.434876] tcf_block_put_ext.part.30+0x8f/0x1b0 [ 71.440122] tcf_block_put+0x4d/0x70 [ 71.444108] cbq_destroy+0x4d/0xd0 [sch_cbq] [ 71.448869] qdisc_destroy+0x62/0x130 [ 71.452951] dsmark_destroy+0x2a/0x70 [sch_dsmark] [ 71.458300] qdisc_destroy+0x62/0x130 [ 71.462373] qdisc_graft+0x3ba/0x470 [ 71.466359] tc_get_qdisc+0x2a6/0x2c0 [ 71.470443] ? cred_has_capability+0x7d/0x130 [ 71.475307] rtnetlink_rcv_msg+0x263/0x2d0 [ 71.479875] ? rtnl_calcit.isra.30+0x110/0x110 [ 71.484832] netlink_rcv_skb+0x4d/0x130 [ 71.489109] netlink_unicast+0x1a3/0x250 [ 71.493482] netlink_sendmsg+0x2ae/0x3a0 [ 71.497859] sock_sendmsg+0x36/0x40 [ 71.501748] ___sys_sendmsg+0x26f/0x2d0 [ 71.506029] ? handle_pte_fault+0x586/0xdf0 [ 71.510694] ? __handle_mm_fault+0x389/0x500 [ 71.515457] ? __sys_sendmsg+0x5e/0xa0 [ 71.519636] __sys_sendmsg+0x5e/0xa0 [ 71.523626] do_syscall_64+0x5b/0x180 [ 71.527711] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 71.533345] RIP: 0033:0x7f9d3e257f10 [ 71.537331] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 [ 71.558401] RSP: 002b:00007fff6f893398 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 71.566848] RAX: ffffffffffffffda RBX: 000000005b71274d RCX: 00007f9d3e257f10 [ 71.574810] RDX: 0000000000000000 RSI: 00007fff6f8933e0 RDI: 0000000000000003 [ 71.582770] RBP: 00007fff6f8933e0 R08: 000000000000ffff R09: 0000000000000003 [ 71.590729] R10: 00007fff6f892e20 R11: 0000000000000246 R12: 0000000000000000 [ 71.598689] R13: 0000000000662ee0 R14: 0000000000000000 R15: 0000000000000000 [ 71.606651] Modules linked in: sch_cbq cls_tcindex sch_dsmark xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_coni [ 71.685425] libahci i2c_algo_bit i2c_core i40e libata dca mdio megaraid_sas dm_mirror dm_region_hash dm_log dm_mod [ 71.697075] CR2: 0000000000000004 [ 71.700792] ---[ end trace f604eb1acacd978b ]--- Reproducer: tc qdisc add dev lo handle 1:0 root dsmark indices 64 set_tc_index tc filter add dev lo parent 1:0 protocol ip prio 1 tcindex mask 0xfc shift 2 tc qdisc add dev lo parent 1:0 handle 2:0 cbq bandwidth 10Mbit cell 8 avpkt 1000 mpu 64 tc class add dev lo parent 2:0 classid 2:1 cbq bandwidth 10Mbit rate 1500Kbit avpkt 1000 prio 1 bounded isolated allot 1514 weight 1 maxburst 10 tc filter add dev lo parent 2:0 protocol ip prio 1 handle 0x2e tcindex classid 2:1 pass_on tc qdisc add dev lo parent 2:1 pfifo limit 5 tc qdisc del dev lo root This is because in tcindex_set_parms, when there is no old_r, we set new exts to cr.exts. And we didn't set it to filter when r == &new_filter_result. Then in tcindex_delete() -> tcf_exts_get_net(), we will get NULL pointer dereference as we didn't init exts. Fix it by moving tcf_exts_change() after "if (old_r && old_r != r)" check. Then we don't need "cr" as there is no errout after that. Fixes: bf63ac7 ("net_sched: fix an oops in tcindex filter") Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit 373c83a ] Using built-in in kernel image without a firmware in filesystem or in the kernel image can lead to a kernel NULL pointer deference. Watchdog need to be stopped in brcmf_sdio_remove The system is going down NOW! [ 1348.110759] Unable to handle kernel NULL pointer dereference at virtual address 000002f8 Sent SIGTERM to all processes [ 1348.121412] Mem abort info: [ 1348.126962] ESR = 0x96000004 [ 1348.130023] Exception class = DABT (current EL), IL = 32 bits [ 1348.135948] SET = 0, FnV = 0 [ 1348.138997] EA = 0, S1PTW = 0 [ 1348.142154] Data abort info: [ 1348.145045] ISV = 0, ISS = 0x00000004 [ 1348.148884] CM = 0, WnR = 0 [ 1348.151861] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____) [ 1348.158475] [00000000000002f8] pgd=0000000000000000 [ 1348.163364] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 1348.168927] Modules linked in: ipv6 [ 1348.172421] CPU: 3 PID: 1421 Comm: brcmf_wdog/mmc0 Not tainted 4.17.0-rc5-next-20180517 rockchip-linux#18 [ 1348.180757] Hardware name: Amarula A64-Relic (DT) [ 1348.185455] pstate: 60000005 (nZCv daif -PAN -UAO) [ 1348.190251] pc : brcmf_sdiod_freezer_count+0x0/0x20 [ 1348.195124] lr : brcmf_sdio_watchdog_thread+0x64/0x290 [ 1348.200253] sp : ffff00000b85be30 [ 1348.203561] x29: ffff00000b85be30 x28: 0000000000000000 [ 1348.208868] x27: ffff00000b6cb918 x26: ffff80003b990638 [ 1348.214176] x25: ffff0000087b1a20 x24: ffff80003b94f800 [ 1348.219483] x23: ffff000008e620c8 x22: ffff000008f0b660 [ 1348.224790] x21: ffff000008c6a858 x20: 00000000fffffe00 [ 1348.230097] x19: ffff80003b94f800 x18: 0000000000000001 [ 1348.235404] x17: 0000ffffab2e8a74 x16: ffff0000080d7de8 [ 1348.240711] x15: 0000000000000000 x14: 0000000000000400 [ 1348.246018] x13: 0000000000000400 x12: 0000000000000001 [ 1348.251324] x11: 00000000000002c4 x10: 0000000000000a10 [ 1348.256631] x9 : ffff00000b85bc40 x8 : ffff80003be11870 [ 1348.261937] x7 : ffff80003dfc7308 x6 : 000000078ff08b55 [ 1348.267243] x5 : 00000139e1058400 x4 : 0000000000000000 [ 1348.272550] x3 : dead000000000100 x2 : 958f2788d6618100 [ 1348.277856] x1 : 00000000fffffe00 x0 : 0000000000000000 Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
[ Upstream commit 03bc7ca ] If the registration fails then mdio_unregister is called. However at unbind the unregister ia attempted again resulting in the below crash [ 73.544038] kernel BUG at drivers/net/phy/mdio_bus.c:415! [ 73.549362] Internal error: Oops - BUG: 0 [#1] SMP [ 73.554127] Modules linked in: [ 73.557168] CPU: 0 PID: 2249 Comm: sh Not tainted 4.14.0 rockchip-linux#183 [ 73.562895] Hardware name: xlnx,zynqmp (DT) [ 73.567062] task: ffffffc879e41180 task.stack: ffffff800cbe0000 [ 73.572973] PC is at mdiobus_unregister+0x84/0x88 [ 73.577656] LR is at axienet_mdio_teardown+0x18/0x30 [ 73.582601] pc : [<ffffff80085fa4cc>] lr : [<ffffff8008616858>] pstate: 20000145 [ 73.589981] sp : ffffff800cbe3c30 [ 73.593277] x29: ffffff800cbe3c30 x28: ffffffc879e41180 [ 73.598573] x27: ffffff8008a21000 x26: 0000000000000040 [ 73.603868] x25: 0000000000000124 x24: ffffffc879efe920 [ 73.609164] x23: 0000000000000060 x22: ffffffc879e02000 [ 73.614459] x21: ffffffc879e02800 x20: ffffffc87b0b8870 [ 73.619754] x19: ffffffc879e02800 x18: 000000000000025d [ 73.625050] x17: 0000007f9a719ad0 x16: ffffff8008195bd8 [ 73.630345] x15: 0000007f9a6b3d00 x14: 0000000000000010 [ 73.635640] x13: 74656e7265687465 x12: 0000000000000030 [ 73.640935] x11: 0000000000000030 x10: 0101010101010101 [ 73.646231] x9 : 241f394f42533300 x8 : ffffffc8799f6e98 [ 73.651526] x7 : ffffffc8799f6f18 x6 : ffffffc87b0ba318 [ 73.656822] x5 : ffffffc87b0ba498 x4 : 0000000000000000 [ 73.662117] x3 : 0000000000000000 x2 : 0000000000000008 [ 73.667412] x1 : 0000000000000004 x0 : ffffffc8799f4000 [ 73.672708] Process sh (pid: 2249, stack limit = 0xffffff800cbe0000) Fix the same by making the bus NULL on unregister. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
…eadlock commit 0ee223b upstream. A long time ago the unfortunate decision was taken to add a self-deletion attribute to the sysfs SCSI device directory. That decision was unfortunate because self-deletion is really tricky. We can't drop that attribute because widely used user space software depends on it, namely the rescan-scsi-bus.sh script. Hence this patch that avoids that writing into that attribute triggers a deadlock. See also commit 7973cbd9fbd9 ("[PATCH] add sysfs attributes to scan and delete scsi_devices"). This patch avoids that self-removal triggers the following deadlock: ====================================================== WARNING: possible circular locking dependency detected 4.18.0-rc2-dbg+ #5 Not tainted ------------------------------------------------------ modprobe/6539 is trying to acquire lock: 000000008323c4cd (kn->count#202){++++}, at: kernfs_remove_by_name_ns+0x45/0x90 but task is already holding lock: 00000000a6ec2c69 (&shost->scan_mutex){+.+.}, at: scsi_remove_host+0x21/0x150 [scsi_mod] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&shost->scan_mutex){+.+.}: __mutex_lock+0xfe/0xc70 mutex_lock_nested+0x1b/0x20 scsi_remove_device+0x26/0x40 [scsi_mod] sdev_store_delete+0x27/0x30 [scsi_mod] dev_attr_store+0x3e/0x50 sysfs_kf_write+0x87/0xa0 kernfs_fop_write+0x190/0x230 __vfs_write+0xd2/0x3b0 vfs_write+0x101/0x270 ksys_write+0xab/0x120 __x64_sys_write+0x43/0x50 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (kn->count#202){++++}: lock_acquire+0xd2/0x260 __kernfs_remove+0x424/0x4a0 kernfs_remove_by_name_ns+0x45/0x90 remove_files.isra.1+0x3a/0x90 sysfs_remove_group+0x5c/0xc0 sysfs_remove_groups+0x39/0x60 device_remove_attrs+0x82/0xb0 device_del+0x251/0x580 __scsi_remove_device+0x19f/0x1d0 [scsi_mod] scsi_forget_host+0x37/0xb0 [scsi_mod] scsi_remove_host+0x9b/0x150 [scsi_mod] sdebug_driver_remove+0x4b/0x150 [scsi_debug] device_release_driver_internal+0x241/0x360 device_release_driver+0x12/0x20 bus_remove_device+0x1bc/0x290 device_del+0x259/0x580 device_unregister+0x1a/0x70 sdebug_remove_adapter+0x8b/0xf0 [scsi_debug] scsi_debug_exit+0x76/0xe8 [scsi_debug] __x64_sys_delete_module+0x1c1/0x280 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&shost->scan_mutex); lock(kn->count#202); lock(&shost->scan_mutex); lock(kn->count#202); *** DEADLOCK *** 2 locks held by modprobe/6539: #0: 00000000efaf9298 (&dev->mutex){....}, at: device_release_driver_internal+0x68/0x360 #1: 00000000a6ec2c69 (&shost->scan_mutex){+.+.}, at: scsi_remove_host+0x21/0x150 [scsi_mod] stack backtrace: CPU: 10 PID: 6539 Comm: modprobe Not tainted 4.18.0-rc2-dbg+ #5 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa4/0xf5 print_circular_bug.isra.34+0x213/0x221 __lock_acquire+0x1a7e/0x1b50 lock_acquire+0xd2/0x260 __kernfs_remove+0x424/0x4a0 kernfs_remove_by_name_ns+0x45/0x90 remove_files.isra.1+0x3a/0x90 sysfs_remove_group+0x5c/0xc0 sysfs_remove_groups+0x39/0x60 device_remove_attrs+0x82/0xb0 device_del+0x251/0x580 __scsi_remove_device+0x19f/0x1d0 [scsi_mod] scsi_forget_host+0x37/0xb0 [scsi_mod] scsi_remove_host+0x9b/0x150 [scsi_mod] sdebug_driver_remove+0x4b/0x150 [scsi_debug] device_release_driver_internal+0x241/0x360 device_release_driver+0x12/0x20 bus_remove_device+0x1bc/0x290 device_del+0x259/0x580 device_unregister+0x1a/0x70 sdebug_remove_adapter+0x8b/0xf0 [scsi_debug] scsi_debug_exit+0x76/0xe8 [scsi_debug] __x64_sys_delete_module+0x1c1/0x280 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe See also https://www.mail-archive.com/linux-scsi@vger.kernel.org/msg54525.html. Fixes: ac0ece9 ("scsi: use device_remove_file_self() instead of device_schedule_callback()") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
friendlyarm
pushed a commit
that referenced
this pull request
Mar 8, 2019
error log: [ 35.638112] Internal error: Accessing user space memory outside uaccess.h routines: 96000005 [#1] PREEMPT SMP [ 35.638996] Modules linked in: [ 35.639287] CPU: 3 PID: 226 Comm: surfaceflinger Not tainted 4.4.126 [ 35.639873] Hardware name: Strides RK3399 Development Q7 Board Rev [ 35.640483] task: ffffffc0f100ec00 task.stack:ffffffc0eeaac000 [ 35.641011] PC is at vop_crtc_bandwidth+0x22c/0x310 [ 35.641448] LR is at vop_crtc_bandwidth+0x118/0x310 [ 35.641883] pc : [<ffffff80084af988>] lr :[<ffffff80084af874>] pstate: 60400145 [ 35.642526] sp : ffffffc0eeaafad0 [ 35.642821] x29: ffffffc0eeaafad0 x28: 0000000000000020 ... [ 35.780538] [<ffffff80084af988>] vop_crtc_bandwidth+0x22c/0x310 [ 35.781057] [<ffffff80084a87b4>] rockchip_drm_atomic_commit+0xb0/0x1d0 [ 35.781634] [<ffffff8008491678>] drm_atomic_commit+0x64/0x70 [ 35.782140] [<ffffff8008492b08>] drm_mode_atomic_ioctl+0x5d0/0x6a0 [ 35.782683] [<ffffff8008476b30>] drm_ioctl+0x2e4/0x400 [ 35.783145] [<ffffff80081d0db0>] do_vfs_ioctl+0xa4/0x7d8 [ 35.783616] [<ffffff80081d1540>] SyS_ioctl+0x5c/0x8c [ 35.784055] [<ffffff80080832f0>] el0_svc_naked+0x24/0x28 [ 35.784528] Code: 7100113f 54ffff41 f9412ca0 f9400000 (f9400002) [ 35.785256] ---[ end trace b3812e3405f44f95 ]--- ... Change-Id: I695c9628b155294adcf5135f82e4af901ce1b82c Signed-off-by: Sandy Huang <hjc@rock-chips.com>
friendlyarm
pushed a commit
that referenced
this pull request
Feb 26, 2020
[ Upstream commit 334b0f4 ] There is a race condition which results in a deadlock when rmdir and mkdir execute concurrently: $ ls /sys/fs/resctrl/c1/mon_groups/m1/ cpus cpus_list mon_data tasks Thread 1: rmdir /sys/fs/resctrl/c1 Thread 2: mkdir /sys/fs/resctrl/c1/mon_groups/m1 3 locks held by mkdir/48649: #0: (sb_writers#17){.+.+}, at: [<ffffffffb4ca2aa0>] mnt_want_write+0x20/0x50 #1: (&type->i_mutex_dir_key#8/1){+.+.}, at: [<ffffffffb4c8c13b>] filename_create+0x7b/0x170 #2: (rdtgroup_mutex){+.+.}, at: [<ffffffffb4a4389d>] rdtgroup_kn_lock_live+0x3d/0x70 4 locks held by rmdir/48652: #0: (sb_writers#17){.+.+}, at: [<ffffffffb4ca2aa0>] mnt_want_write+0x20/0x50 #1: (&type->i_mutex_dir_key#8/1){+.+.}, at: [<ffffffffb4c8c3cf>] do_rmdir+0x13f/0x1e0 #2: (&type->i_mutex_dir_key#8){++++}, at: [<ffffffffb4c86d5d>] vfs_rmdir+0x4d/0x120 #3: (rdtgroup_mutex){+.+.}, at: [<ffffffffb4a4389d>] rdtgroup_kn_lock_live+0x3d/0x70 Thread 1 is deleting control group "c1". Holding rdtgroup_mutex, kernfs_remove() removes all kernfs nodes under directory "c1" recursively, then waits for sub kernfs node "mon_groups" to drop active reference. Thread 2 is trying to create a subdirectory "m1" in the "mon_groups" directory. The wrapper kernfs_iop_mkdir() takes an active reference to the "mon_groups" directory but the code drops the active reference to the parent directory "c1" instead. As a result, Thread 1 is blocked on waiting for active reference to drop and never release rdtgroup_mutex, while Thread 2 is also blocked on trying to get rdtgroup_mutex. Thread 1 (rdtgroup_rmdir) Thread 2 (rdtgroup_mkdir) (rmdir /sys/fs/resctrl/c1) (mkdir /sys/fs/resctrl/c1/mon_groups/m1) ------------------------- ------------------------- kernfs_iop_mkdir /* * kn: "m1", parent_kn: "mon_groups", * prgrp_kn: parent_kn->parent: "c1", * * "mon_groups", parent_kn->active++: 1 */ kernfs_get_active(parent_kn) kernfs_iop_rmdir /* "c1", kn->active++ */ kernfs_get_active(kn) rdtgroup_kn_lock_live atomic_inc(&rdtgrp->waitcount) /* "c1", kn->active-- */ kernfs_break_active_protection(kn) mutex_lock rdtgroup_rmdir_ctrl free_all_child_rdtgrp sentry->flags = RDT_DELETED rdtgroup_ctrl_remove rdtgrp->flags = RDT_DELETED kernfs_get(kn) kernfs_remove(rdtgrp->kn) __kernfs_remove /* "mon_groups", sub_kn */ atomic_add(KN_DEACTIVATED_BIAS, &sub_kn->active) kernfs_drain(sub_kn) /* * sub_kn->active == KN_DEACTIVATED_BIAS + 1, * waiting on sub_kn->active to drop, but it * never drops in Thread 2 which is blocked * on getting rdtgroup_mutex. */ Thread 1 hangs here ----> wait_event(sub_kn->active == KN_DEACTIVATED_BIAS) ... rdtgroup_mkdir rdtgroup_mkdir_mon(parent_kn, prgrp_kn) mkdir_rdt_prepare(parent_kn, prgrp_kn) rdtgroup_kn_lock_live(prgrp_kn) atomic_inc(&rdtgrp->waitcount) /* * "c1", prgrp_kn->active-- * * The active reference on "c1" is * dropped, but not matching the * actual active reference taken * on "mon_groups", thus causing * Thread 1 to wait forever while * holding rdtgroup_mutex. */ kernfs_break_active_protection( prgrp_kn) /* * Trying to get rdtgroup_mutex * which is held by Thread 1. */ Thread 2 hangs here ----> mutex_lock ... The problem is that the creation of a subdirectory in the "mon_groups" directory incorrectly releases the active protection of its parent directory instead of itself before it starts waiting for rdtgroup_mutex. This is triggered by the rdtgroup_mkdir() flow calling rdtgroup_kn_lock_live()/rdtgroup_kn_unlock() with kernfs node of the parent control group ("c1") as argument. It should be called with kernfs node "mon_groups" instead. What is currently missing is that the kn->priv of "mon_groups" is NULL instead of pointing to the rdtgrp. Fix it by pointing kn->priv to rdtgrp when "mon_groups" is created. Then it could be passed to rdtgroup_kn_lock_live()/rdtgroup_kn_unlock() instead. And then it operates on the same rdtgroup structure but handles the active reference of kernfs node "mon_groups" to prevent deadlock. The same changes are also made to the "mon_data" directories. This results in some unused function parameters that will be cleaned up in follow-up patch as the focus here is on the fix only in support of backporting efforts. Fixes: c7d9aac ("x86/intel_rdt/cqm: Add mkdir support for RDT monitoring") Suggested-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1578500886-21771-4-git-send-email-xiaochen.shen@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
friendlyarm
pushed a commit
that referenced
this pull request
Feb 26, 2020
[ Upstream commit 2b5b825 ] hsr_port_get_rcu() can return NULL, so we need to be careful. general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 1 PID: 10249 Comm: syz-executor.5 Not tainted 5.5.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:199 [inline] RIP: 0010:hsr_addr_is_self+0x86/0x330 net/hsr/hsr_framereg.c:44 Code: 04 00 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 e8 6b ff 94 f9 4c 89 f2 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 75 02 00 00 48 8b 43 30 49 39 c6 49 89 47 c0 0f RSP: 0018:ffffc90000da8a90 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff87e0cc33 RDX: 0000000000000006 RSI: ffffffff87e035d5 RDI: 0000000000000000 RBP: ffffc90000da8b20 R08: ffff88808e7de040 R09: ffffed1015d2707c R10: ffffed1015d2707b R11: ffff8880ae9383db R12: ffff8880a689bc5e R13: 1ffff920001b5153 R14: 0000000000000030 R15: ffffc90000da8af8 FS: 00007fd7a42be700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32338000 CR3: 00000000a928c000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> hsr_handle_frame+0x1c5/0x630 net/hsr/hsr_slave.c:31 __netif_receive_skb_core+0xfbc/0x30b0 net/core/dev.c:5099 __netif_receive_skb_one_core+0xa8/0x1a0 net/core/dev.c:5196 __netif_receive_skb+0x2c/0x1d0 net/core/dev.c:5312 process_backlog+0x206/0x750 net/core/dev.c:6144 napi_poll net/core/dev.c:6582 [inline] net_rx_action+0x508/0x1120 net/core/dev.c:6650 __do_softirq+0x262/0x98c kernel/softirq.c:292 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082 </IRQ> Fixes: c5a7591 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Feb 26, 2020
commit f1037ec upstream. The daxctl unit test for the dax_kmem driver currently triggers the (false positive) lockdep splat below. It results from the fact that remove_memory_block_devices() is invoked under the mem_hotplug_lock() causing lockdep entanglements with cpu_hotplug_lock() and sysfs (kernfs active state tracking). It is a false positive because the sysfs attribute path triggering the memory remove is not the same attribute path associated with memory-block device. sysfs_break_active_protection() is not applicable since there is no real deadlock conflict, instead move memory-block device removal outside the lock. The mem_hotplug_lock() is not needed to synchronize the memory-block device removal vs the page online state, that is already handled by lock_device_hotplug(). Specifically, lock_device_hotplug() is sufficient to allow try_remove_memory() to check the offline state of the memblocks and be assured that any in progress online attempts are flushed / blocked by kernfs_drain() / attribute removal. The add_memory() path safely creates memblock devices under the mem_hotplug_lock(). There is no kernfs active state synchronization in the memblock device_register() path, so nothing to fix there. This change is only possible thanks to the recent change that refactored memory block device removal out of arch_remove_memory() (commit 4c4b7f9 "mm/memory_hotplug: remove memory block devices before arch_remove_memory()"), and David's due diligence tracking down the guarantees afforded by kernfs_drain(). Not flagged for -stable since this only impacts ongoing development and lockdep validation, not a runtime issue. ====================================================== WARNING: possible circular locking dependency detected 5.5.0-rc3+ rockchip-linux#230 Tainted: G OE ------------------------------------------------------ lt-daxctl/6459 is trying to acquire lock: ffff99c7f0003510 (kn->count#241){++++}, at: kernfs_remove_by_name_ns+0x41/0x80 but task is already holding lock: ffffffffa76a5450 (mem_hotplug_lock.rw_sem){++++}, at: percpu_down_write+0x20/0xe0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (mem_hotplug_lock.rw_sem){++++}: __lock_acquire+0x39c/0x790 lock_acquire+0xa2/0x1b0 get_online_mems+0x3e/0xb0 kmem_cache_create_usercopy+0x2e/0x260 kmem_cache_create+0x12/0x20 ptlock_cache_init+0x20/0x28 start_kernel+0x243/0x547 secondary_startup_64+0xb6/0xc0 -> #1 (cpu_hotplug_lock.rw_sem){++++}: __lock_acquire+0x39c/0x790 lock_acquire+0xa2/0x1b0 cpus_read_lock+0x3e/0xb0 online_pages+0x37/0x300 memory_subsys_online+0x17d/0x1c0 device_online+0x60/0x80 state_store+0x65/0xd0 kernfs_fop_write+0xcf/0x1c0 vfs_write+0xdb/0x1d0 ksys_write+0x65/0xe0 do_syscall_64+0x5c/0xa0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (kn->count#241){++++}: check_prev_add+0x98/0xa40 validate_chain+0x576/0x860 __lock_acquire+0x39c/0x790 lock_acquire+0xa2/0x1b0 __kernfs_remove+0x25f/0x2e0 kernfs_remove_by_name_ns+0x41/0x80 remove_files.isra.0+0x30/0x70 sysfs_remove_group+0x3d/0x80 sysfs_remove_groups+0x29/0x40 device_remove_attrs+0x39/0x70 device_del+0x16a/0x3f0 device_unregister+0x16/0x60 remove_memory_block_devices+0x82/0xb0 try_remove_memory+0xb5/0x130 remove_memory+0x26/0x40 dev_dax_kmem_remove+0x44/0x6a [kmem] device_release_driver_internal+0xe4/0x1c0 unbind_store+0xef/0x120 kernfs_fop_write+0xcf/0x1c0 vfs_write+0xdb/0x1d0 ksys_write+0x65/0xe0 do_syscall_64+0x5c/0xa0 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: kn->count#241 --> cpu_hotplug_lock.rw_sem --> mem_hotplug_lock.rw_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(mem_hotplug_lock.rw_sem); lock(cpu_hotplug_lock.rw_sem); lock(mem_hotplug_lock.rw_sem); lock(kn->count#241); *** DEADLOCK *** No fixes tag as this has been a long standing issue that predated the addition of kernfs lockdep annotations. Link: http://lkml.kernel.org/r/157991441887.2763922.4770790047389427325.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Feb 26, 2020
commit e533dbe upstream. Since commit: d44f1b8 ("arm64: KVM/mm: Move SEA handling behind a single 'claim' interface") ... the top-level APEI SEA handler has the shape: 1. current_flags = arch_local_save_flags() 2. local_daif_restore(DAIF_ERRCTX) 3. <GHES handler> 4. local_daif_restore(current_flags) However, since commit: 4a50321 ("arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking") ... when pseudo-NMIs (pNMIs) are in use, arch_local_save_flags() will save the PMR value rather than the DAIF flags. The combination of these two commits means that the APEI SEA handler will erroneously attempt to restore the PMR value into DAIF. Fix this by factoring local_daif_save_flags() out of local_daif_save(), so that we can consistently save DAIF in step #1, regardless of whether pNMIs are in use. Both commits were introduced concurrently in v5.0. Cc: <stable@vger.kernel.org> Fixes: 4a50321 ("arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking") Fixes: d44f1b8 ("arm64: KVM/mm: Move SEA handling behind a single 'claim' interface") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Feb 26, 2020
commit 16bb7ab upstream. nvmem_cell_info_to_nvmem_cell implementation has static allocation of name. nvmem_add_cells_from_of() call may return error and kfree name results in memory abort. Use kstrdup_const() and kfree_const calls for name alloc and free. Unable to handle kernel paging request at virtual address ffffffffffe44888 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 swapper pgtable: 64k pages, 48-bit VAs, pgdp=00000000815d0000 [ffffffffffe44888] pgd=0000000081d30803, pud=0000000081d30803, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 43 Comm: kworker/2:1 Tainted Hardware name: quill (DT) Workqueue: events deferred_probe_work_func pstate: a0000005 (NzCv daif -PAN -UAO) pc : kfree+0x38/0x278 lr : nvmem_cell_drop+0x68/0x80 sp : ffff80001284f9d0 x29: ffff80001284f9d0 x28: ffff0001f677e830 x27: ffff800011b0b000 x26: ffff0001c36e1008 x25: ffff8000112ad000 x24: ffff8000112c9000 x23: ffffffffffffffea x22: ffff800010adc7f0 x21: ffffffffffe44880 x20: ffff800011b0b068 x19: ffff80001122d380 x18: ffffffffffffffff x17: 00000000d5cb4756 x16: 0000000070b193b8 x15: ffff8000119538c8 x14: 0720072007200720 x13: 07200720076e0772 x12: 07750762072d0765 x11: 0773077507660765 x10: 072f073007300730 x9 : 0730073207380733 x8 : 0000000000000151 x7 : 07660765072f0720 x6 : ffff0001c00e0f00 x5 : 0000000000000000 x4 : ffff0001c0b43800 x3 : ffff800011b0b068 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffdfffe00000 Call trace: kfree+0x38/0x278 nvmem_cell_drop+0x68/0x80 nvmem_device_remove_all_cells+0x2c/0x50 nvmem_register.part.9+0x520/0x628 devm_nvmem_register+0x48/0xa0 tegra_fuse_probe+0x140/0x1f0 platform_drv_probe+0x50/0xa0 really_probe+0x108/0x348 driver_probe_device+0x58/0x100 __device_attach_driver+0x90/0xb0 bus_for_each_drv+0x64/0xc8 __device_attach+0xd8/0x138 device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0x74/0xb0 process_one_work+0x1e0/0x358 worker_thread+0x208/0x488 kthread+0x118/0x120 ret_from_fork+0x10/0x18 Code: d350feb5 f2dffbe0 aa1e03f6 8b151815 (f94006a0) ---[ end trace 49b1303c6b83198e ]--- Fixes: badcdff ("nvmem: Convert to using %pOFn instead of device_node.name") Signed-off-by: Bitan Biswas <bbiswas@nvidia.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200109104017.6249-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Feb 26, 2020
commit 9dc086f upstream. The early versions of our kernel user access prevention (KUAP) were written by Russell and Christophe, and didn't have separate read/write access. At some point I picked up the series and added the read/write access, but I failed to update the usages in futex.h to correctly allow read and write. However we didn't notice because of another bug which was causing the low-level code to always enable read and write. That bug was fixed recently in commit 1d8f739 ("powerpc/kuap: Fix set direction in allow/prevent_user_access()"). futex_atomic_cmpxchg_inatomic() is passed the user address as %3 and does: 1: lwarx %1, 0, %3 cmpw 0, %1, %4 bne- 3f 2: stwcx. %5, 0, %3 Which clearly loads and stores from/to %3. The logic in arch_futex_atomic_op_inuser() is similar, so fix both of them to use allow_read_write_user(). Without this fix, and with PPC_KUAP_DEBUG=y, we see eg: Bug: Read fault blocked by AMR! WARNING: CPU: 94 PID: 149215 at arch/powerpc/include/asm/book3s/64/kup-radix.h:126 __do_page_fault+0x600/0xf30 CPU: 94 PID: 149215 Comm: futex_requeue_p Tainted: G W 5.5.0-rc7-gcc9x-g4c25df5640ae #1 ... NIP [c000000000070680] __do_page_fault+0x600/0xf30 LR [c00000000007067c] __do_page_fault+0x5fc/0xf30 Call Trace: [c00020138e5637e0] [c00000000007067c] __do_page_fault+0x5fc/0xf30 (unreliable) [c00020138e5638c0] [c00000000000ada8] handle_page_fault+0x10/0x30 --- interrupt: 301 at cmpxchg_futex_value_locked+0x68/0xd0 LR = futex_lock_pi_atomic+0xe0/0x1f0 [c00020138e563bc0] [c000000000217b50] futex_lock_pi_atomic+0x80/0x1f0 (unreliable) [c00020138e563c30] [c00000000021b668] futex_requeue+0x438/0xb60 [c00020138e563d60] [c00000000021c6cc] do_futex+0x1ec/0x2b0 [c00020138e563d90] [c00000000021c8b8] sys_futex+0x128/0x200 [c00020138e563e20] [c00000000000b7ac] system_call+0x5c/0x68 Fixes: de78a9c ("powerpc: Add a framework for Kernel Userspace Access Protection") Cc: stable@vger.kernel.org # v5.2+ Reported-by: syzbot+e808452bad7c375cbee6@syzkaller-ppc64.appspotmail.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/20200207122145.11928-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Feb 26, 2020
…nodes commit 7227ff4 upstream. There is a race between adding and removing elements to the tree mod log list and rbtree that can lead to use-after-free problems. Consider the following example that explains how/why the problems happens: 1) Task A has mod log element with sequence number 200. It currently is the only element in the mod log list; 2) Task A calls btrfs_put_tree_mod_seq() because it no longer needs to access the tree mod log. When it enters the function, it initializes 'min_seq' to (u64)-1. Then it acquires the lock 'tree_mod_seq_lock' before checking if there are other elements in the mod seq list. Since the list it empty, 'min_seq' remains set to (u64)-1. Then it unlocks the lock 'tree_mod_seq_lock'; 3) Before task A acquires the lock 'tree_mod_log_lock', task B adds itself to the mod seq list through btrfs_get_tree_mod_seq() and gets a sequence number of 201; 4) Some other task, name it task C, modifies a btree and because there elements in the mod seq list, it adds a tree mod elem to the tree mod log rbtree. That node added to the mod log rbtree is assigned a sequence number of 202; 5) Task B, which is doing fiemap and resolving indirect back references, calls btrfs get_old_root(), with 'time_seq' == 201, which in turn calls tree_mod_log_search() - the search returns the mod log node from the rbtree with sequence number 202, created by task C; 6) Task A now acquires the lock 'tree_mod_log_lock', starts iterating the mod log rbtree and finds the node with sequence number 202. Since 202 is less than the previously computed 'min_seq', (u64)-1, it removes the node and frees it; 7) Task B still has a pointer to the node with sequence number 202, and it dereferences the pointer itself and through the call to __tree_mod_log_rewind(), resulting in a use-after-free problem. This issue can be triggered sporadically with the test case generic/561 from fstests, and it happens more frequently with a higher number of duperemove processes. When it happens to me, it either freezes the VM or it produces a trace like the following before crashing: [ 1245.321140] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [ 1245.321200] CPU: 1 PID: 26997 Comm: pool Not tainted 5.5.0-rc6-btrfs-next-52 #1 [ 1245.321235] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 [ 1245.321287] RIP: 0010:rb_next+0x16/0x50 [ 1245.321307] Code: .... [ 1245.321372] RSP: 0018:ffffa151c4d039b0 EFLAGS: 00010202 [ 1245.321388] RAX: 6b6b6b6b6b6b6b6b RBX: ffff8ae221363c80 RCX: 6b6b6b6b6b6b6b6b [ 1245.321409] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8ae221363c80 [ 1245.321439] RBP: ffff8ae20fcc4688 R08: 0000000000000002 R09: 0000000000000000 [ 1245.321475] R10: ffff8ae20b120910 R11: 00000000243f8bb1 R12: 0000000000000038 [ 1245.321506] R13: ffff8ae221363c80 R14: 000000000000075f R15: ffff8ae223f762b8 [ 1245.321539] FS: 00007fdee1ec7700(0000) GS:ffff8ae236c80000(0000) knlGS:0000000000000000 [ 1245.321591] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1245.321614] CR2: 00007fded4030c48 CR3: 000000021da16003 CR4: 00000000003606e0 [ 1245.321642] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1245.321668] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1245.321706] Call Trace: [ 1245.321798] __tree_mod_log_rewind+0xbf/0x280 [btrfs] [ 1245.321841] btrfs_search_old_slot+0x105/0xd00 [btrfs] [ 1245.321877] resolve_indirect_refs+0x1eb/0xc60 [btrfs] [ 1245.321912] find_parent_nodes+0x3dc/0x11b0 [btrfs] [ 1245.321947] btrfs_check_shared+0x115/0x1c0 [btrfs] [ 1245.321980] ? extent_fiemap+0x59d/0x6d0 [btrfs] [ 1245.322029] extent_fiemap+0x59d/0x6d0 [btrfs] [ 1245.322066] do_vfs_ioctl+0x45a/0x750 [ 1245.322081] ksys_ioctl+0x70/0x80 [ 1245.322092] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 1245.322113] __x64_sys_ioctl+0x16/0x20 [ 1245.322126] do_syscall_64+0x5c/0x280 [ 1245.322139] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1245.322155] RIP: 0033:0x7fdee3942dd7 [ 1245.322177] Code: .... [ 1245.322258] RSP: 002b:00007fdee1ec6c88 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 1245.322294] RAX: ffffffffffffffda RBX: 00007fded40210d8 RCX: 00007fdee3942dd7 [ 1245.322314] RDX: 00007fded40210d8 RSI: 00000000c020660b RDI: 0000000000000004 [ 1245.322337] RBP: 0000562aa89e7510 R08: 0000000000000000 R09: 00007fdee1ec6d44 [ 1245.322369] R10: 0000000000000073 R11: 0000000000000246 R12: 00007fdee1ec6d48 [ 1245.322390] R13: 00007fdee1ec6d40 R14: 00007fded40210d0 R15: 00007fdee1ec6d50 [ 1245.322423] Modules linked in: .... [ 1245.323443] ---[ end trace 01de1e9ec5dff3cd ]--- Fix this by ensuring that btrfs_put_tree_mod_seq() computes the minimum sequence number and iterates the rbtree while holding the lock 'tree_mod_log_lock' in write mode. Also get rid of the 'tree_mod_seq_lock' lock, since it is now redundant. Fixes: bd989ba ("Btrfs: add tree modification log functions") Fixes: 097b8a7 ("Btrfs: join tree mod log code with the code holding back delayed refs") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Feb 26, 2020
commit 42ffb0b upstream. There exists a deadlock with range_cyclic that has existed forever. If we loop around with a bio already built we could deadlock with a writer who has the page locked that we're attempting to write but is waiting on a page in our bio to be written out. The task traces are as follows PID: 1329874 TASK: ffff889ebcdf3800 CPU: 33 COMMAND: "kworker/u113:5" #0 [ffffc900297bb658] __schedule at ffffffff81a4c33f #1 [ffffc900297bb6e0] schedule at ffffffff81a4c6e3 #2 [ffffc900297bb6f8] io_schedule at ffffffff81a4ca42 #3 [ffffc900297bb708] __lock_page at ffffffff811f145b #4 [ffffc900297bb798] __process_pages_contig at ffffffff814bc502 #5 [ffffc900297bb8c8] lock_delalloc_pages at ffffffff814bc684 #6 [ffffc900297bb900] find_lock_delalloc_range at ffffffff814be9ff #7 [ffffc900297bb9a0] writepage_delalloc at ffffffff814bebd0 #8 [ffffc900297bba18] __extent_writepage at ffffffff814bfbf2 #9 [ffffc900297bba98] extent_write_cache_pages at ffffffff814bffbd PID: 2167901 TASK: ffff889dc6a59c00 CPU: 14 COMMAND: "aio-dio-invalid" #0 [ffffc9003b50bb18] __schedule at ffffffff81a4c33f #1 [ffffc9003b50bba0] schedule at ffffffff81a4c6e3 #2 [ffffc9003b50bbb8] io_schedule at ffffffff81a4ca42 #3 [ffffc9003b50bbc8] wait_on_page_bit at ffffffff811f24d6 #4 [ffffc9003b50bc60] prepare_pages at ffffffff814b05a7 #5 [ffffc9003b50bcd8] btrfs_buffered_write at ffffffff814b1359 #6 [ffffc9003b50bdb0] btrfs_file_write_iter at ffffffff814b5933 #7 [ffffc9003b50be38] new_sync_write at ffffffff8128f6a8 #8 [ffffc9003b50bec8] vfs_write at ffffffff81292b9d #9 [ffffc9003b50bf00] ksys_pwrite64 at ffffffff81293032 I used drgn to find the respective pages we were stuck on page_entry.page 0xffffea00fbfc7500 index 8148 bit 15 pid 2167901 page_entry.page 0xffffea00f9bb7400 index 7680 bit 0 pid 1329874 As you can see the kworker is waiting for bit 0 (PG_locked) on index 7680, and aio-dio-invalid is waiting for bit 15 (PG_writeback) on index 8148. aio-dio-invalid has 7680, and the kworker epd looks like the following crash> struct extent_page_data ffffc900297bbbb0 struct extent_page_data { bio = 0xffff889f747ed830, tree = 0xffff889eed6ba448, extent_locked = 0, sync_io = 0 } Probably worth mentioning as well that it waits for writeback of the page to complete while holding a lock on it (at prepare_pages()). Using drgn I walked the bio pages looking for page 0xffffea00fbfc7500 which is the one we're waiting for writeback on bio = Object(prog, 'struct bio', address=0xffff889f747ed830) for i in range(0, bio.bi_vcnt.value_()): bv = bio.bi_io_vec[i] if bv.bv_page.value_() == 0xffffea00fbfc7500: print("FOUND IT") which validated what I suspected. The fix for this is simple, flush the epd before we loop back around to the beginning of the file during writeout. Fixes: b293f02 ("Btrfs: Add writepages support") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Feb 26, 2020
commit 5750c37 upstream. Raviu reported that running his regular fs_trim segfaulted with the following backtrace: [ 237.525947] assertion failed: prev, in ../fs/btrfs/extent_io.c:1595 [ 237.525984] ------------[ cut here ]------------ [ 237.525985] kernel BUG at ../fs/btrfs/ctree.h:3117! [ 237.525992] invalid opcode: 0000 [#1] SMP PTI [ 237.525998] CPU: 4 PID: 4423 Comm: fstrim Tainted: G U OE 5.4.14-8-vanilla #1 [ 237.526001] Hardware name: ASUSTeK COMPUTER INC. [ 237.526044] RIP: 0010:assfail.constprop.58+0x18/0x1a [btrfs] [ 237.526079] Call Trace: [ 237.526120] find_first_clear_extent_bit+0x13d/0x150 [btrfs] [ 237.526148] btrfs_trim_fs+0x211/0x3f0 [btrfs] [ 237.526184] btrfs_ioctl_fitrim+0x103/0x170 [btrfs] [ 237.526219] btrfs_ioctl+0x129a/0x2ed0 [btrfs] [ 237.526227] ? filemap_map_pages+0x190/0x3d0 [ 237.526232] ? do_filp_open+0xaf/0x110 [ 237.526238] ? _copy_to_user+0x22/0x30 [ 237.526242] ? cp_new_stat+0x150/0x180 [ 237.526247] ? do_vfs_ioctl+0xa4/0x640 [ 237.526278] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [ 237.526283] do_vfs_ioctl+0xa4/0x640 [ 237.526288] ? __do_sys_newfstat+0x3c/0x60 [ 237.526292] ksys_ioctl+0x70/0x80 [ 237.526297] __x64_sys_ioctl+0x16/0x20 [ 237.526303] do_syscall_64+0x5a/0x1c0 [ 237.526310] entry_SYSCALL_64_after_hwframe+0x49/0xbe That was due to btrfs_fs_device::aloc_tree being empty. Initially I thought this wasn't possible and as a percaution have put the assert in find_first_clear_extent_bit. Turns out this is indeed possible and could happen when a file system with SINGLE data/metadata profile has a 2nd device added. Until balance is run or a new chunk is allocated on this device it will be completely empty. In this case find_first_clear_extent_bit should return the full range [0, -1ULL] and let the caller handle this i.e for trim the end will be capped at the size of actual device. Link: https://lore.kernel.org/linux-btrfs/izW2WNyvy1dEDweBICizKnd2KDwDiDyY2EYQr4YCwk7pkuIpthx-JRn65MPBde00ND6V0_Lh8mW0kZwzDiLDv25pUYWxkskWNJnVP0kgdMA=@protonmail.com/ Fixes: 45bfcfc ("btrfs: Implement find_first_clear_extent_bit") CC: stable@vger.kernel.org # 5.2+ Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Feb 26, 2020
commit 080d89f upstream. Once rc_open is called on the input device, lirc events can be delivered. Ensure lirc is ready to do so else we might get this: Registered IR keymap rc-hauppauge rc rc0: Hauppauge WinTV PVR-350 as /devices/pci0000:00/0000:00:1e.0/0000:04:00.0/i2c-0/0-0018/rc/rc0 input: Hauppauge WinTV PVR-350 as /devices/pci0000:00/0000:00:1e.0/0000:04:00.0/i2c-0/0-0018/rc/rc0/input9 BUG: kernel NULL pointer dereference, address: 0000000000000038 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 1 PID: 17 Comm: kworker/1:0 Not tainted 5.3.11-300.fc31.x86_64 #1 Hardware name: /DG43NB, BIOS NBG4310H.86A.0096.2009.0903.1845 09/03/2009 Workqueue: events ir_work [ir_kbd_i2c] RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0 Code: a6 b4 07 00 00 49 81 c6 b8 07 00 00 55 53 e8 ba a7 9d ff 4c 89 e7 49 89 45 00 e8 5e 7a 25 00 49 8b 1e 48 89 c5 4c 39 f3 74 58 <8b> 43 38 8b 53 40 89 c1 2b 4b 3c 39 ca 72 41 21 d0 49 8b 7d 00 49 RSP: 0018:ffffaae2000b3d88 EFLAGS: 00010017 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000019 RDX: 0000000000000001 RSI: 006e801b1f26ce6a RDI: ffff9e39797c37b4 RBP: 0000000000000002 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: ffff9e39797c37b4 R13: ffffaae2000b3db8 R14: ffff9e39797c37b8 R15: ffff9e39797c33d8 FS: 0000000000000000(0000) GS:ffff9e397b680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 0000000035844000 CR4: 00000000000006e0 Call Trace: ir_do_keydown+0x8e/0x2b0 rc_keydown+0x52/0xc0 ir_work+0xb8/0x130 [ir_kbd_i2c] process_one_work+0x19d/0x340 worker_thread+0x50/0x3b0 kthread+0xfb/0x130 ? process_one_work+0x340/0x340 ? kthread_park+0x80/0x80 ret_from_fork+0x35/0x40 Modules linked in: rc_hauppauge tuner msp3400 saa7127 saa7115 ivtv(+) tveeprom cx2341x v4l2_common videodev mc i2c_algo_bit ir_kbd_i2c ip_tables firewire_ohci e1000e serio_raw firewire_core ata_generic crc_itu_t pata_acpi pata_jmicron fuse CR2: 0000000000000038 ---[ end trace c67c2697a99fa74b ]--- RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0 Code: a6 b4 07 00 00 49 81 c6 b8 07 00 00 55 53 e8 ba a7 9d ff 4c 89 e7 49 89 45 00 e8 5e 7a 25 00 49 8b 1e 48 89 c5 4c 39 f3 74 58 <8b> 43 38 8b 53 40 89 c1 2b 4b 3c 39 ca 72 41 21 d0 49 8b 7d 00 49 RSP: 0018:ffffaae2000b3d88 EFLAGS: 00010017 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000019 RDX: 0000000000000001 RSI: 006e801b1f26ce6a RDI: ffff9e39797c37b4 RBP: 0000000000000002 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: ffff9e39797c37b4 R13: ffffaae2000b3db8 R14: ffff9e39797c37b8 R15: ffff9e39797c33d8 FS: 0000000000000000(0000) GS:ffff9e397b680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 0000000035844000 CR4: 00000000000006e0 rc rc0: lirc_dev: driver ir_kbd_i2c registered at minor = 0, scancode receiver, no transmitter tuner-simple 0-0061: creating new instance tuner-simple 0-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) ivtv0: Registered device video0 for encoder MPG (4096 kB) ivtv0: Registered device video32 for encoder YUV (2048 kB) ivtv0: Registered device vbi0 for encoder VBI (1024 kB) ivtv0: Registered device video24 for encoder PCM (320 kB) ivtv0: Registered device radio0 for encoder radio ivtv0: Registered device video16 for decoder MPG (1024 kB) ivtv0: Registered device vbi8 for decoder VBI (64 kB) ivtv0: Registered device vbi16 for decoder VOUT ivtv0: Registered device video48 for decoder YUV (1024 kB) Cc: stable@vger.kernel.org Tested-by: Nick French <nickfrench@gmail.com> Reported-by: Nick French <nickfrench@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Feb 26, 2020
commit 69503e5 upstream. After the commit 44ea394 ("drivers/watchdog: make use of devm_register_reboot_notifier()") the struct notifier_block reboot_nb in the struct watchdog_device is removed from the reboot notifiers chain at the time watchdog's chardev is closed. But at least in i6300esb.c case reboot_nb is embedded in the struct esb_dev which can be freed on its device removal and before the chardev is closed, thus UAF at reboot: [ 7.728581] esb_probe: esb_dev.watchdog_device ffff91316f91ab28 ts# uname -r note the address ^^^ 5.5.0-rc5-ae6088-wdog ts# ./openwdog0 & [1] 696 ts# opened /dev/watchdog0, sleeping 10s... ts# echo 1 > /sys/devices/pci0000\:00/0000\:00\:09.0/remove [ 178.086079] devres:rel_nodes: dev ffff91317668a0b0 data ffff91316f91ab28 esb_dev.watchdog_device.reboot_nb memory is freed here ^^^ ts# ...woken up [ 181.459010] devres:rel_nodes: dev ffff913171781000 data ffff913174a1dae8 [ 181.460195] devm_unreg_reboot_notifier: res ffff913174a1dae8 nb ffff91316f91ab78 attempt to use memory already freed ^^^ [ 181.461063] devm_unreg_reboot_notifier: nb->call 6b6b6b6b6b6b6b6b [ 181.461243] devm_unreg_reboot_notifier: nb->next 6b6b6b6b6b6b6b6b freed memory is filled with a slub poison ^^^ [1]+ Done ./openwdog0 ts# reboot [ 229.921862] systemd-shutdown[1]: Rebooting. [ 229.939265] notifier_call_chain: nb ffffffff9c6c2f20 nb->next ffffffff9c6d50c0 [ 229.943080] notifier_call_chain: nb ffffffff9c6d50c0 nb->next 6b6b6b6b6b6b6b6b [ 229.946054] notifier_call_chain: nb 6b6b6b6b6b6b6b6b INVAL [ 229.957584] general protection fault: 0000 [#1] SMP [ 229.958770] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.5.0-rc5-ae6088-wdog [ 229.960224] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 229.963288] RIP: 0010:notifier_call_chain+0x66/0xd0 [ 229.969082] RSP: 0018:ffffb20dc0013d88 EFLAGS: 00010246 [ 229.970812] RAX: 000000000000002e RBX: 6b6b6b6b6b6b6b6b RCX: 00000000000008b3 [ 229.972929] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffffffff9ccc46ac [ 229.975028] RBP: 0000000000000001 R08: 0000000000000000 R09: 00000000000008b3 [ 229.977039] R10: 0000000000000001 R11: ffffffff9c26c740 R12: 0000000000000000 [ 229.979155] R13: 6b6b6b6b6b6b6b6b R14: 0000000000000000 R15: 00000000fffffffa ... slub_debug=FZP poison ^^^ [ 229.989089] Call Trace: [ 229.990157] blocking_notifier_call_chain+0x43/0x59 [ 229.991401] kernel_restart_prepare+0x14/0x30 [ 229.992607] kernel_restart+0x9/0x30 [ 229.993800] __do_sys_reboot+0x1d2/0x210 [ 230.000149] do_syscall_64+0x3d/0x130 [ 230.001277] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 230.002639] RIP: 0033:0x7f5461bdd177 [ 230.016402] Modules linked in: i6300esb [ 230.050261] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Fix the crash by reverting 44ea394 so unregister_reboot_notifier() is called when watchdog device is removed. This also makes handling of the reboot notifier unified with the handling of the restart handler, which is freed with unregister_restart_handler() in the same place. Fixes: 44ea394 ("drivers/watchdog: make use of devm_register_reboot_notifier()") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Vladis Dronov <vdronov@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200108125347.6067-1-vdronov@redhat.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Feb 26, 2020
commit 2d797e9 upstream. Writing a cloned file triggers a kernel oops and the user-space command process is also killed by the system. The bug can be reproduced stably via: 1) create a file under ocfs2 file system directory. journalctl -b > aa.txt 2) create a cloned file for this file. reflink aa.txt bb.txt 3) write the cloned file with dd command. dd if=/dev/zero of=bb.txt bs=512 count=1 conv=notrunc The dd command is killed by the kernel, then you can see the oops message via dmesg command. [ 463.875404] BUG: kernel NULL pointer dereference, address: 0000000000000028 [ 463.875413] #PF: supervisor read access in kernel mode [ 463.875416] #PF: error_code(0x0000) - not-present page [ 463.875418] PGD 0 P4D 0 [ 463.875425] Oops: 0000 [#1] SMP PTI [ 463.875431] CPU: 1 PID: 2291 Comm: dd Tainted: G OE 5.3.16-2-default [ 463.875433] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 [ 463.875500] RIP: 0010:ocfs2_refcount_cow+0xa4/0x5d0 [ocfs2] [ 463.875505] Code: 06 89 6c 24 38 89 eb f6 44 24 3c 02 74 be 49 8b 47 28 [ 463.875508] RSP: 0018:ffffa2cb409dfce8 EFLAGS: 00010202 [ 463.875512] RAX: ffff8b1ebdca8000 RBX: 0000000000000001 RCX: ffff8b1eb73a9df0 [ 463.875515] RDX: 0000000000056a01 RSI: 0000000000000000 RDI: 0000000000000000 [ 463.875517] RBP: 0000000000000001 R08: ffff8b1eb73a9de0 R09: 0000000000000000 [ 463.875520] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 [ 463.875522] R13: ffff8b1eb922f048 R14: 0000000000000000 R15: ffff8b1eb922f048 [ 463.875526] FS: 00007f8f44d15540(0000) GS:ffff8b1ebeb00000(0000) knlGS:0000000000000000 [ 463.875529] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 463.875532] CR2: 0000000000000028 CR3: 000000003c17a000 CR4: 00000000000006e0 [ 463.875546] Call Trace: [ 463.875596] ? ocfs2_inode_lock_full_nested+0x18b/0x960 [ocfs2] [ 463.875648] ocfs2_file_write_iter+0xaf8/0xc70 [ocfs2] [ 463.875672] new_sync_write+0x12d/0x1d0 [ 463.875688] vfs_write+0xad/0x1a0 [ 463.875697] ksys_write+0xa1/0xe0 [ 463.875710] do_syscall_64+0x60/0x1f0 [ 463.875743] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 463.875758] RIP: 0033:0x7f8f4482ed44 [ 463.875762] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 [ 463.875765] RSP: 002b:00007fff300a79d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 463.875769] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8f4482ed44 [ 463.875771] RDX: 0000000000000200 RSI: 000055f771b5c000 RDI: 0000000000000001 [ 463.875774] RBP: 0000000000000200 R08: 00007f8f44af9c78 R09: 0000000000000003 [ 463.875776] R10: 000000000000089f R11: 0000000000000246 R12: 000055f771b5c000 [ 463.875779] R13: 0000000000000200 R14: 0000000000000000 R15: 000055f771b5c000 This regression problem was introduced by commit e74540b ("ocfs2: protect extent tree in ocfs2_prepare_inode_for_write()"). Link: http://lkml.kernel.org/r/20200121050153.13290-1-ghe@suse.com Fixes: e74540b ("ocfs2: protect extent tree in ocfs2_prepare_inode_for_write()"). Signed-off-by: Gang He <ghe@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Feb 26, 2020
[ Upstream commit db3fa27 ] __in6_dev_get(dev) called from inet6_set_link_af() can return NULL. The needed check has been recently removed, let's add it back. While do_setlink() does call validate_linkmsg() : ... err = validate_linkmsg(dev, tb); /* OK at this point */ ... It is possible that the following call happening before the ->set_link_af() removes IPv6 if MTU is less than 1280 : if (tb[IFLA_MTU]) { err = dev_set_mtu_ext(dev, nla_get_u32(tb[IFLA_MTU]), extack); if (err < 0) goto errout; status |= DO_SETLINK_MODIFIED; } ... if (tb[IFLA_AF_SPEC]) { ... err = af_ops->set_link_af(dev, af); ->inet6_set_link_af() // CRASH because idev is NULL Please note that IPv4 is immune to the bug since inet_set_link_af() does : struct in_device *in_dev = __in_dev_get_rcu(dev); if (!in_dev) return -EAFNOSUPPORT; This problem has been mentioned in commit cf7afbf ("rtnl: make link af-specific updates atomic") changelog : This method is not fail proof, while it is currently sufficient to make set_link_af() inerrable and thus 100% atomic, the validation function method will not be able to detect all error scenarios in the future, there will likely always be errors depending on states which are f.e. not protected by rtnl_mutex and thus may change between validation and setting. IPv6: ADDRCONF(NETDEV_CHANGE): lo: link becomes ready general protection fault, probably for non-canonical address 0xdffffc0000000056: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x00000000000002b0-0x00000000000002b7] CPU: 0 PID: 9698 Comm: syz-executor712 Not tainted 5.5.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:inet6_set_link_af+0x66e/0xae0 net/ipv6/addrconf.c:5733 Code: 38 d0 7f 08 84 c0 0f 85 20 03 00 00 48 8d bb b0 02 00 00 45 0f b6 64 24 04 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 1a 03 00 00 44 89 a3 b0 02 00 RSP: 0018:ffffc90005b06d40 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff86df39a6 RDX: 0000000000000056 RSI: ffffffff86df3e74 RDI: 00000000000002b0 RBP: ffffc90005b06e70 R08: ffff8880a2ac0380 R09: ffffc90005b06db0 R10: fffff52000b60dbe R11: ffffc90005b06df7 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8880a1fcc424 R15: dffffc0000000000 FS: 0000000000c46880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f0494ca0d0 CR3: 000000009e4ac000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: do_setlink+0x2a9f/0x3720 net/core/rtnetlink.c:2754 rtnl_group_changelink net/core/rtnetlink.c:3103 [inline] __rtnl_newlink+0xdd1/0x1790 net/core/rtnetlink.c:3257 rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3377 rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5438 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5456 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:672 ____sys_sendmsg+0x753/0x880 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0x105/0x1d0 net/socket.c:2430 __do_sys_sendmsg net/socket.c:2439 [inline] __se_sys_sendmsg net/socket.c:2437 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4402e9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffd62fbcf8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004402e9 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000008 R09: 00000000004002c8 R10: 0000000000000005 R11: 0000000000000246 R12: 0000000000401b70 R13: 0000000000401c00 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace cfa7664b8fdcdff3 ]--- RIP: 0010:inet6_set_link_af+0x66e/0xae0 net/ipv6/addrconf.c:5733 Code: 38 d0 7f 08 84 c0 0f 85 20 03 00 00 48 8d bb b0 02 00 00 45 0f b6 64 24 04 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 1a 03 00 00 44 89 a3 b0 02 00 RSP: 0018:ffffc90005b06d40 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff86df39a6 RDX: 0000000000000056 RSI: ffffffff86df3e74 RDI: 00000000000002b0 RBP: ffffc90005b06e70 R08: ffff8880a2ac0380 R09: ffffc90005b06db0 R10: fffff52000b60dbe R11: ffffc90005b06df7 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8880a1fcc424 R15: dffffc0000000000 FS: 0000000000c46880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000004 CR3: 000000009e4ac000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 7dc2bcc ("Validate required parameters in inet6_validate_link_af") Signed-off-by: Eric Dumazet <edumazet@google.com> Bisected-and-reported-by: syzbot <syzkaller@googlegroups.com> Cc: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Feb 26, 2020
[ Upstream commit c194839 ] free_match_list could be called when the flow table is already locked. We need to pass this notation to tree_put_node. It fixes the following lockdep warnning: [ 1797.268537] ============================================ [ 1797.276837] WARNING: possible recursive locking detected [ 1797.285101] 5.5.0-rc5+ #10 Not tainted [ 1797.291641] -------------------------------------------- [ 1797.299917] handler10/9296 is trying to acquire lock: [ 1797.307885] ffff889ad399a0a0 (&node->lock){++++}, at: tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.319694] [ 1797.319694] but task is already holding lock: [ 1797.330904] ffff889ad399a0a0 (&node->lock){++++}, at: nested_down_write_ref_node.part.33+0x1a/0x60 [mlx5_core] [ 1797.344707] [ 1797.344707] other info that might help us debug this: [ 1797.356952] Possible unsafe locking scenario: [ 1797.356952] [ 1797.368333] CPU0 [ 1797.373357] ---- [ 1797.378364] lock(&node->lock); [ 1797.384222] lock(&node->lock); [ 1797.390031] [ 1797.390031] *** DEADLOCK *** [ 1797.390031] [ 1797.403003] May be due to missing lock nesting notation [ 1797.403003] [ 1797.414691] 3 locks held by handler10/9296: [ 1797.421465] #0: ffff889cf2c5a110 (&block->cb_lock){++++}, at: tc_setup_cb_add+0x70/0x250 [ 1797.432810] #1: ffff88a030081490 (&comp->sem){++++}, at: mlx5_devcom_get_peer_data+0x4c/0xb0 [mlx5_core] [ 1797.445829] #2: ffff889ad399a0a0 (&node->lock){++++}, at: nested_down_write_ref_node.part.33+0x1a/0x60 [mlx5_core] [ 1797.459913] [ 1797.459913] stack backtrace: [ 1797.469436] CPU: 1 PID: 9296 Comm: handler10 Kdump: loaded Not tainted 5.5.0-rc5+ #10 [ 1797.480643] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 [ 1797.491480] Call Trace: [ 1797.496701] dump_stack+0x96/0xe0 [ 1797.502864] __lock_acquire.cold.63+0xf8/0x212 [ 1797.510301] ? lockdep_hardirqs_on+0x250/0x250 [ 1797.517701] ? mark_held_locks+0x55/0xa0 [ 1797.524547] ? quarantine_put+0xb7/0x160 [ 1797.531422] ? lockdep_hardirqs_on+0x17d/0x250 [ 1797.538913] lock_acquire+0xd6/0x1f0 [ 1797.545529] ? tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.553701] down_write+0x94/0x140 [ 1797.560206] ? tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.568464] ? down_write_killable_nested+0x170/0x170 [ 1797.576925] ? del_hw_flow_group+0xde/0x1f0 [mlx5_core] [ 1797.585629] tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.593891] ? free_match_list.part.25+0x147/0x170 [mlx5_core] [ 1797.603389] free_match_list.part.25+0xe0/0x170 [mlx5_core] [ 1797.612654] _mlx5_add_flow_rules+0x17e2/0x20b0 [mlx5_core] [ 1797.621838] ? lock_acquire+0xd6/0x1f0 [ 1797.629028] ? esw_get_prio_table+0xb0/0x3e0 [mlx5_core] [ 1797.637981] ? alloc_insert_flow_group+0x420/0x420 [mlx5_core] [ 1797.647459] ? try_to_wake_up+0x4c7/0xc70 [ 1797.654881] ? lock_downgrade+0x350/0x350 [ 1797.662271] ? __mutex_unlock_slowpath+0xb1/0x3f0 [ 1797.670396] ? find_held_lock+0xac/0xd0 [ 1797.677540] ? mlx5_add_flow_rules+0xdc/0x360 [mlx5_core] [ 1797.686467] mlx5_add_flow_rules+0xdc/0x360 [mlx5_core] [ 1797.695134] ? _mlx5_add_flow_rules+0x20b0/0x20b0 [mlx5_core] [ 1797.704270] ? irq_exit+0xa5/0x170 [ 1797.710764] ? retint_kernel+0x10/0x10 [ 1797.717698] ? mlx5_eswitch_set_rule_source_port.isra.9+0x122/0x230 [mlx5_core] [ 1797.728708] mlx5_eswitch_add_offloaded_rule+0x465/0x6d0 [mlx5_core] [ 1797.738713] ? mlx5_eswitch_get_prio_range+0x30/0x30 [mlx5_core] [ 1797.748384] ? mlx5_fc_stats_work+0x670/0x670 [mlx5_core] [ 1797.757400] mlx5e_tc_offload_fdb_rules.isra.27+0x24/0x90 [mlx5_core] [ 1797.767665] mlx5e_tc_add_fdb_flow+0xaf8/0xd40 [mlx5_core] [ 1797.776886] ? mlx5e_encap_put+0xd0/0xd0 [mlx5_core] [ 1797.785562] ? mlx5e_alloc_flow.isra.43+0x18c/0x1c0 [mlx5_core] [ 1797.795353] __mlx5e_add_fdb_flow+0x2e2/0x440 [mlx5_core] [ 1797.804558] ? mlx5e_tc_update_neigh_used_value+0x8c0/0x8c0 [mlx5_core] [ 1797.815093] ? wait_for_completion+0x260/0x260 [ 1797.823272] mlx5e_configure_flower+0xe94/0x1620 [mlx5_core] [ 1797.832792] ? __mlx5e_add_fdb_flow+0x440/0x440 [mlx5_core] [ 1797.842096] ? down_read+0x11a/0x2e0 [ 1797.849090] ? down_write+0x140/0x140 [ 1797.856142] ? mlx5e_rep_indr_setup_block_cb+0xc0/0xc0 [mlx5_core] [ 1797.866027] tc_setup_cb_add+0x11a/0x250 [ 1797.873339] fl_hw_replace_filter+0x25e/0x320 [cls_flower] [ 1797.882385] ? fl_hw_destroy_filter+0x1c0/0x1c0 [cls_flower] [ 1797.891607] fl_change+0x1d54/0x1fb6 [cls_flower] [ 1797.899772] ? __rhashtable_insert_fast.constprop.50+0x9f0/0x9f0 [cls_flower] [ 1797.910728] ? lock_downgrade+0x350/0x350 [ 1797.918187] ? __radix_tree_lookup+0xa5/0x130 [ 1797.926046] ? fl_set_key+0x1590/0x1590 [cls_flower] [ 1797.934611] ? __rhashtable_insert_fast.constprop.50+0x9f0/0x9f0 [cls_flower] [ 1797.945673] tc_new_tfilter+0xcd1/0x1240 [ 1797.953138] ? tc_del_tfilter+0xb10/0xb10 [ 1797.960688] ? avc_has_perm_noaudit+0x92/0x320 [ 1797.968721] ? avc_has_perm_noaudit+0x1df/0x320 [ 1797.976816] ? avc_has_extended_perms+0x990/0x990 [ 1797.985090] ? mark_lock+0xaa/0x9e0 [ 1797.991988] ? match_held_lock+0x1b/0x240 [ 1797.999457] ? match_held_lock+0x1b/0x240 [ 1798.006859] ? find_held_lock+0xac/0xd0 [ 1798.014045] ? symbol_put_addr+0x40/0x40 [ 1798.021317] ? rcu_read_lock_sched_held+0xd0/0xd0 [ 1798.029460] ? tc_del_tfilter+0xb10/0xb10 [ 1798.036810] rtnetlink_rcv_msg+0x4d5/0x620 [ 1798.044236] ? rtnl_bridge_getlink+0x460/0x460 [ 1798.052034] ? lockdep_hardirqs_on+0x250/0x250 [ 1798.059837] ? match_held_lock+0x1b/0x240 [ 1798.067146] ? find_held_lock+0xac/0xd0 [ 1798.074246] netlink_rcv_skb+0xc6/0x1f0 [ 1798.081339] ? rtnl_bridge_getlink+0x460/0x460 [ 1798.089104] ? netlink_ack+0x440/0x440 [ 1798.096061] netlink_unicast+0x2d4/0x3b0 [ 1798.103189] ? netlink_attachskb+0x3f0/0x3f0 [ 1798.110724] ? _copy_from_iter_full+0xda/0x370 [ 1798.118415] netlink_sendmsg+0x3ba/0x6a0 [ 1798.125478] ? netlink_unicast+0x3b0/0x3b0 [ 1798.132705] ? netlink_unicast+0x3b0/0x3b0 [ 1798.139880] sock_sendmsg+0x94/0xa0 [ 1798.146332] ____sys_sendmsg+0x36c/0x3f0 [ 1798.153251] ? copy_msghdr_from_user+0x165/0x230 [ 1798.160941] ? kernel_sendmsg+0x30/0x30 [ 1798.167738] ___sys_sendmsg+0xeb/0x150 [ 1798.174411] ? sendmsg_copy_msghdr+0x30/0x30 [ 1798.181649] ? lock_downgrade+0x350/0x350 [ 1798.188559] ? rcu_read_lock_sched_held+0xd0/0xd0 [ 1798.196239] ? __fget+0x21d/0x320 [ 1798.202335] ? do_dup2+0x2a0/0x2a0 [ 1798.208499] ? lock_downgrade+0x350/0x350 [ 1798.215366] ? __fget_light+0xd6/0xf0 [ 1798.221808] ? syscall_trace_enter+0x369/0x5d0 [ 1798.229112] __sys_sendmsg+0xd3/0x160 [ 1798.235511] ? __sys_sendmsg_sock+0x60/0x60 [ 1798.242478] ? syscall_trace_enter+0x233/0x5d0 [ 1798.249721] ? syscall_slow_exit_work+0x280/0x280 [ 1798.257211] ? do_syscall_64+0x1e/0x2e0 [ 1798.263680] do_syscall_64+0x72/0x2e0 [ 1798.269950] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: bd71b08 ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Feb 26, 2020
commit 6f1a489 upstream. Evan tracked down a subtle race between the update of the MSI message and the device raising an interrupt internally on PCI devices which do not support MSI masking. The update of the MSI message is non-atomic and consists of either 2 or 3 sequential 32bit wide writes to the PCI config space. - Write address low 32bits - Write address high 32bits (If supported by device) - Write data When an interrupt is migrated then both address and data might change, so the kernel attempts to mask the MSI interrupt first. But for MSI masking is optional, so there exist devices which do not provide it. That means that if the device raises an interrupt internally between the writes then a MSI message is sent built from half updated state. On x86 this can lead to spurious interrupts on the wrong interrupt vector when the affinity setting changes both address and data. As a consequence the device interrupt can be lost causing the device to become stuck or malfunctioning. Evan tried to handle that by disabling MSI accross an MSI message update. That's not feasible because disabling MSI has issues on its own: If MSI is disabled the PCI device is routing an interrupt to the legacy INTx mechanism. The INTx delivery can be disabled, but the disablement is not working on all devices. Some devices lose interrupts when both MSI and INTx delivery are disabled. Another way to solve this would be to enforce the allocation of the same vector on all CPUs in the system for this kind of screwed devices. That could be done, but it would bring back the vector space exhaustion problems which got solved a few years ago. Fortunately the high address (if supported by the device) is only relevant when X2APIC is enabled which implies interrupt remapping. In the interrupt remapping case the affinity setting is happening at the interrupt remapping unit and the PCI MSI message is programmed only once when the PCI device is initialized. That makes it possible to solve it with a two step update: 1) Target the MSI msg to the new vector on the current target CPU 2) Target the MSI msg to the new vector on the new target CPU In both cases writing the MSI message is only changing a single 32bit word which prevents the issue of inconsistency. After writing the final destination it is necessary to check whether the device issued an interrupt while the intermediate state #1 (new vector, current CPU) was in effect. This is possible because the affinity change is always happening on the current target CPU. The code runs with interrupts disabled, so the interrupt can be detected by checking the IRR of the local APIC. If the vector is pending in the IRR then the interrupt is retriggered on the new target CPU by sending an IPI for the associated vector on the target CPU. This can cause spurious interrupts on both the local and the new target CPU. 1) If the new vector is not in use on the local CPU and the device affected by the affinity change raised an interrupt during the transitional state (step #1 above) then interrupt entry code will ignore that spurious interrupt. The vector is marked so that the 'No irq handler for vector' warning is supressed once. 2) If the new vector is in use already on the local CPU then the IRR check might see an pending interrupt from the device which is using this vector. The IPI to the new target CPU will then invoke the handler of the device, which got the affinity change, even if that device did not issue an interrupt 3) If the new vector is in use already on the local CPU and the device affected by the affinity change raised an interrupt during the transitional state (step #1 above) then the handler of the device which uses that vector on the local CPU will be invoked. expose issues in device driver interrupt handlers which are not prepared to handle a spurious interrupt correctly. This not a regression, it's just exposing something which was already broken as spurious interrupts can happen for a lot of reasons and all driver handlers need to be able to deal with them. Reported-by: Evan Green <evgreen@chromium.org> Debugged-by: Evan Green <evgreen@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Evan Green <evgreen@chromium.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87imkr4s7n.fsf@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
friendlyarm
pushed a commit
that referenced
this pull request
Feb 26, 2020
commit febac33 upstream. Kernel crashes inside QEMU/KVM are observed: kernel BUG at kernel/time/timer.c:1154! BUG_ON(timer_pending(timer) || !timer->function) in add_timer_on(). At the same time another cpu got: general protection fault: 0000 [#1] SMP PTI of poinson pointer 0xdead000000000200 in: __hlist_del at include/linux/list.h:681 (inlined by) detach_timer at kernel/time/timer.c:818 (inlined by) expire_timers at kernel/time/timer.c:1355 (inlined by) __run_timers at kernel/time/timer.c:1686 (inlined by) run_timer_softirq at kernel/time/timer.c:1699 Unfortunately kernel logs are badly scrambled, stacktraces are lost. Printing the timer->function before the BUG_ON() pointed to clocksource_watchdog(). The execution of clocksource_watchdog() can race with a sequence of clocksource_stop_watchdog() .. clocksource_start_watchdog(): expire_timers() detach_timer(timer, true); timer->entry.pprev = NULL; raw_spin_unlock_irq(&base->lock); call_timer_fn clocksource_watchdog() clocksource_watchdog_kthread() or clocksource_unbind() spin_lock_irqsave(&watchdog_lock, flags); clocksource_stop_watchdog(); del_timer(&watchdog_timer); watchdog_running = 0; spin_unlock_irqrestore(&watchdog_lock, flags); spin_lock_irqsave(&watchdog_lock, flags); clocksource_start_watchdog(); add_timer_on(&watchdog_timer, ...); watchdog_running = 1; spin_unlock_irqrestore(&watchdog_lock, flags); spin_lock(&watchdog_lock); add_timer_on(&watchdog_timer, ...); BUG_ON(timer_pending(timer) || !timer->function); timer_pending() -> true BUG() I.e. inside clocksource_watchdog() watchdog_timer could be already armed. Check timer_pending() before calling add_timer_on(). This is sufficient as all operations are synchronized by watchdog_lock. Fixes: 75c5158 ("timekeeping: Update clocksource with stop_machine") Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/158048693917.4378.13823603769948933793.stgit@buzz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
2 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Several kernel configs necessary to run docker-ce were disabled.
This attempts to fix this - verified on my NanoPi-M4
(also paves way for enabling kubernetes)
Signed-off-by: Eric Van Hensbergen ericvh@gmail.com